Analysis of the Solidification and Microstructure of Two Aluminium Alloys Reinforced with TiB2 Particles

被引:7
作者
Egizabal, Pedro [1 ]
Garcia de Cortazar, Maider [1 ]
Torregaray, Amaia [3 ]
Veillere, Amelie [2 ]
Douin, Joel [4 ]
Silvain, Jean-Francois [2 ]
机构
[1] Fdn Inasmet, E-20009 Donostia San Sebastian, Spain
[2] Univ Bordeaux, CNRS, ICMCB, F-33608 Pessac, France
[3] Univ Basque Country, UPV EHU, E-48012 Bilbo Bilbao, Spain
[4] CEMES CNRS, F-31055 Toulouse 4, France
关键词
LOST FOAM PROCESSES; MECHANICAL-BEHAVIOR; COMPOSITES; PARTICULATE;
D O I
10.1002/adem.201100040
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Two aluminium alloys with 6 wt% TiB2 particles are studied for applications where increased wear resistance and mechanical strength at high temperature are required. The incorporation of hard ceramic particles has a strong influence on the microstructure and properties of the alloys. TiB2 particles play an important role in the nucleation of the different phases of the alloys during solidification, and in the reduction of grain size and porosity. The solidification patterns of Al-Si7Mg0.3+TiB2 (6 wt%) and Al-Cu5MgTi+TiB2 ( 6 wt%) materials are compared to their corresponding non-reinforced alloys, and the microstructures are analyzed.
引用
收藏
页码:887 / 894
页数:8
相关论文
共 17 条
[1]  
[Anonymous], MICROSTRUCTURE FORMA
[2]  
Backerud LennartJ., 1990, SOLIDIFICATION CHARA, V2
[3]   Investigation of the precipitation kinetics in an Al6061/TiB2 metal matrix composite [J].
Bartels, C ;
Raabe, D ;
Gottstein, G ;
Huber, U .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 237 (01) :12-23
[4]  
Brinkman HJ, 1998, MATER SCI TECH SER, V14, P873, DOI 10.1179/026708398790613452
[5]   Microstructural Analysis of the Reinforced Al-Cu5mgti/Tib2 5 wt % Alloy for Investment Casting Applications [J].
Egizabal, Pedro ;
Garcia de Cortazar, Maider ;
Douin, Joel ;
Torregaray, Amaia ;
Lahaye, Michel ;
Vincent, Cecil ;
Sivain, Jean-Frangois .
ADVANCED ENGINEERING MATERIALS, 2010, 12 (06) :504-508
[6]   Thermal and mechanical behaviour of grey cast iron and ductile iron castings using magnetic molding and lost foam processes [J].
Geffroy, Pierre-Marie ;
Lakehal, Merouane ;
Goni, Javier ;
Beaugnon, Eric ;
Silvain, Jean-Francois .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) :4103-4111
[7]   Thermal and mechanical behavior of Al-Si alloy cast using magnetic molding and lost foam processes [J].
Geffroy, PM ;
Lakehal, M ;
Goñi, J ;
Beaugnon, E ;
Heintz, JM ;
Silvain, JF .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (02) :441-447
[8]   High performance automotive and railway components made from novel competitive aluminium composites [J].
Goñi, J ;
Egizabal, P ;
Coleto, J ;
Mitxelena, I ;
Leunda, I ;
Guridi, JR .
MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (07) :931-934
[9]  
HAN Q, 2000, MINERALS
[10]  
KAJRNCHAIYAKUL J, 2005, ALLUMINIO LEGHE, V10, P47