Application of the Job Safety Analysis (JS']JSA) Method to Assessment Occupational Risk at the Workplace of the Laser Cutter Operator

Occupational risk is closely related to work environment. For the same positions, but in different working conditions threats and level of risk can be different. For this also estimating the degree of damage hazard the largest possible should be adopted effects. However, when estimating probability occurrence of threats should include, among others: working conditions, events from the past, or possible employee behavior (in particular those that may be the cause of an accident at work). The source of the above information may be data from statistics or observations of work stations. The article presents the assessment of occupational risk at the position of the laser cutter operator, which was carried out using the Job Safety Analysis (JSA) method. According to this method, occupational risk is determined on the basis of two parameters, i.e.: consequences of C and probability of consequences P. In turn, the probability of consequences is the sum of three factors: frequency of hazard F, probability of event O and avoidability or damage limitation A.