Design charts for end-plate beam-to-column steel joints

被引：17

作者：

D'Alessandro, Elisabetta ^{[1
]}

Brando, Giuseppe ^{[1
]}

De Matteis, Gianfranco ^{[2
]}

机构：

[1] Univ G dAnnunzio, Dept Engn & Geol, Pescara, Italy

[2] Univ Campania Luigi Vanvitelli, Dept Architecture & Ind Design, Aversa, Italy

来源：

PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS | 2018年 / 171卷 / 06期

关键词：

buildings; structures & design; codes of practice & standards; steel structures; PANEL ZONE; CYCLIC BEHAVIOR; CONNECTIONS; MODEL; SIMULATION; STIFFNESS; STRENGTH; WEB;

D O I：

10.1680/jstbu.16.00203

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The component method provided by Eurocode 3 for the evaluation of strength and stiffness of beam-to-column joints is considered a very laborious procedure that is often difficult to apply. This is owing to the large number of geometrical and mechanical parameters involved in the analytical formulations. Hence, the component method is only seldom used for practical applications, with the consequence that the real behaviour of joints in terms of strength and stiffness is not accounted for. The aim of this paper is to provide an automatic tool that allows an easy-to-use application of the component method for the evaluation of beam-to-column joints stiffness and strength, and also enables plotting of the moment-rotation curve describing the joints' behaviour. Moreover, the proposed tool is used to carry out parametric analyses for two bolt-rows in end-plate beam-to-column steel joints. This is addressed to the definition of design charts for the optimal selection of joints.

引用

页码：444 / 462

页数：19

共 33 条

[1] Experimental and analytical behavior of bolted end-plate connections with or without stiffeners [J].

Abidelah, A. ;

Bouchair, A. ;

Kerdal, D. E. .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2012, 76 :13-27

[2] Cyclic loading of end plate moment connections [J].

Adey, BT ;

Grondin, GY ;

Cheng, JJR .

CANADIAN JOURNAL OF CIVIL ENGINEERING, 2000, 27 (04) :683-701

[3] Cyclic behaviour characterization of web panel components in bolted end-plate steel joints [J].

Augusto, Hugo ;

da Silva, Luis Simoes ;

Rebelo, Carlos ;

Castro, Jose Miguel .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2017, 133 :310-333

[4] Strength of an Aluminum Column Web in Tension [J].

Brando, Giuseppe ;

Sarracco, Gianluca ;

De Matteis, Gianfranco .

JOURNAL OF STRUCTURAL ENGINEERING, 2015, 141 (07)

[5] Shear strength of panel zone in beam-to-column connections [J].

Brandonisio, Giuseppe ;

De Luca, Antonio ;

Mele, Elena .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2012, 71 :129-142

[6]

BSI, 2005, 199318 BSI BS EN

[7] Calibration of a finite element model for isolated bolted end-plate steel connections [J].

Bursi, OS ;

Jaspart, JP .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 1997, 44 (03) :225-262

[8] Finite element analysis and moment resistance of ultra-large capacity end-plate joints [J].

Chen, Xuesen ;

Shi, Gang .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2016, 126 :153-162

[9] Behaviour of welded aluminium T-stub joints under monotonic loading [J].

De Matteis, G. ;

Brescia, M. ;

Formisano, A. ;

Mazzolani, F. M. .

COMPUTERS & STRUCTURES, 2009, 87 (15-16) :990-1002

[10] Influence of Column Axial Load and Heat Affected Zone on the Strength of Aluminium Column Web in Tension [J].

De Matteis, Gianfranco ;

Sarracco, Gianluca ;

Brando, Giuseppe ;

Mazzolani, Federico M. .

MATERIALS, 2014, 7 (05) :3557-3567

← 1 2 3 4 →