Synergistic effect of compatibilizer and sepiolite on the morphology of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(butylene succinate) blends

Blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(butylene succinate) (PBS) with different PHBV/PBS weight ratios (100/0, 75/25, 50/50 and 0/100) were elaborated by melt mixing. The morphological investigation of the different samples, in comparison with that of neat PHBV and neat PBS, pointed out that PHBV/PBS blends form a biphasic system over the whole composition range. Low amount of compatibilizing agent (5 wt%), obtained by grafting maleic anhydride (MA) onto PHBV, i.e. PHBV-g-MA, was used for improving the miscibility between the two components of the blend. The incorporation of a fibrous filler as the sepiolite, easily dispersible in a polymer matrix, was also investigated. The morphology of the different blends as well as the evolution of their material properties were discussed in terms of the sepiolite and compatibilizing agent contents. The dispersion of PBS in the PHBV matrix markedly became finer with incorporation of sepiolite and PHBV-g-MA, due to enhanced interactions between the components. This paper highlighted a synergistic effect induced by the presence of both compatibilizer and sepiolite leading to an improved miscibility of the two blend components. The resulting properties were correlated with the morphology observed for the different blends. (C) 2016 Elsevier Ltd. All rights reserved.