Experimental investigation of joint clearance effects on the dynamics of a slider-crank mechanism

被引：166

作者：

Erkaya, Selcuk ^{[2
]}

Uzmay, Ibrahim ^{[1
]}

机构：

[1] Erciyes Univ, Dept Mech Engn, Fac Engn, Kayseri, Turkey

[2] Erciyes Univ, Dept Mechatron Engn, Fac Engn, Kayseri, Turkey

来源：

MULTIBODY SYSTEM DYNAMICS | 2010年 / 24卷 / 01期

关键词：

Joint clearance; Dynamics of mechanism; Bearing vibration; Shaking force and moment; Noise; CONTINUOUS CONTACT MODEL; MULTIBODY SYSTEMS; 4-BAR LINKAGE; TURNING PAIRS; LEVER MECHANISM; REVOLUTE JOINTS; COUPLER;

D O I：

10.1007/s11044-010-9192-0

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Clearance is inevitable for assembly and mobility in the kinematic joints of mechanisms. Excessive value of this clearance leads to poor operational characteristics, and these result in losses in kinematic and dynamic performances of mechanism. In this study, effects of joint clearances on vibration and noise characteristics of mechanism are investigated. An experimental test rig has been set up, and a planar slider-crank mechanism having two joints with clearance has been used as a model mechanism. Joint clearance is modeled as a massless virtual link and continuous contact mode between journal and bearing in joint connection is considered in theoretical analyses. Three accelerometers and two microphones have been located at different points to measure the vibrations and noises on system during the mechanism motion. The results obtained for the cases with and without joint clearance are evaluated for vibration and noise characteristics of mechanism.

引用

页码：81 / 102

页数：22

共 29 条

[1] Modeling of joints with clearance in flexible multibody systems [J].

Bauchau, OA ;

Rodriguez, J .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2002, 39 (01) :41-63

[2] A THEORETICAL AND EXPERIMENTAL INVESTIGATION OF CONTACT LOSS IN THE CLEARANCES OF A 4-BAR MECHANISM [J].

BENGISU, MT ;

HIDAYETOGLU, T ;

AKAY, A .

JOURNAL OF MECHANISMS TRANSMISSIONS AND AUTOMATION IN DESIGN-TRANSACTIONS OF THE ASME, 1986, 108 (02) :237-244

[3] Dynamic analysis of the reheat-stop-valve mechanism with revolute clearance joint in consideration of thermal effect [J].

Bing, Shi ;

Ye, Jin .

MECHANISM AND MACHINE THEORY, 2008, 43 (12) :1625-1638

[4]

Dubowsky S., 1971, J ENG IND, V93, P305

[5]

DUBOWSKY S, 1974, ASME, V96, P317

[6]

DUBOWSKY S, 1971, ASME, V93, P310

[7] Determining link parameters using genetic algorithm in mechanisms with joint clearance [J].

Erkaya, Selcuk ;

Uzmay, Ibrahim .

MECHANISM AND MACHINE THEORY, 2009, 44 (01) :222-234

[8] A neural-genetic (NN-GA) approach for optimising mechanisms having joints with clearance [J].

Erkaya, Selcuk ;

Uzmay, Ibrahim .

MULTIBODY SYSTEM DYNAMICS, 2008, 20 (01) :69-83

[9] Investigation on effect of joint clearance on dynamics of four-bar mechanism [J].

Erkaya, Selcuk ;

Uzmay, Ibrahim .

NONLINEAR DYNAMICS, 2009, 58 (1-2) :179-198

[10] Optimization of transmission angle for slider-crank mechanism with joint clearances [J].

Erkaya, Selcuk ;

Uzmay, Ibrahim .

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2009, 37 (05) :493-508

← 1 2 3 →