Local damage in a 5-harness satin weave composite under static tension: Part II - Meso-FE modelling

被引：71

作者：

Daggumati, S. ^{[1
]}

Van Paepegem, W. ^{[1
]}

Degrieck, J. ^{[1
]}

Xu, J. ^{[2
]}

Lomov, S. V. ^{[2
]}

Verpoest, I. ^{[2
]}

机构：

[1] Univ Ghent, Dept Mat Sci & Engn, B-9000 Ghent, Belgium

[2] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Louvain, Belgium

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2010年 / 70卷 / 13期

关键词：

Textile composite; Transverse cracking; Finite element analysis (FEA); Multiscale modelling; Weft yarn damage; TEXTILE COMPOSITES; SIMULATION;

D O I：

10.1016/j.compscitech.2010.07.002

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

This study forms the second part of a paper on the local damage analysis in a thermo-plastic 5-harness satin weave composite under uni-axial static tensile load. The experimental observations of Part I are confronted with the meso-FE simulations Part II describes the following steps regarding the unit cell meso-FE modelling starting from. (1) construction of the unit cell geometrical model: (2) estimation of the homogenized elastic constants of the unit cell using different boundary conditions, (3) evaluation of the local stress and damage behavior of the unit cell using meso-FE simulations. The aim of the numerical analysis is to investigate the dependency of local ply stress and damage profiles on the adjacent layers of the laminate In order to reflect the constraints posed by the surrounding plies, depending on the ply placement in the laminate (inside/surface), different unit cell geometrical models with suitable boundary conditions were used for the FE analysis From the numerical simulations It is observed that (a) the homogenized elastic constants of the unit cell vary considerably depending on the boundary conditions used for the unit cell FE analysis, (b) intra-yarn stress and damage profiles are sensitive to the unit cell model as well as the boundary conditions used for the FE analysis. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：1934 / 1941

页数：8

共 36 条

[1]

ADAMS DO, 1994, 19950016857 NASA

[2]

BOGDANOVICH AE, 2006, J MAT SCI

[3]

CARVALHO NV, 2009, ICCM 17 C P

[4] A homogenization procedure for the numerical analysis of woven fabric composites [J].

Carvelli, V ;

Poggi, C .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2001, 32 (10) :1425-1432

[5] A micromechanical model for the analysis of unidirectional elastoplastic composites subjected to 3D stresses [J].

Carvelli, V ;

Taliercio, A .

MECHANICS RESEARCH COMMUNICATIONS, 1999, 26 (05) :547-553

[6]

Chamis C., 1984, 100793 NASA

[7]

CHAPMAN CD, 1994, 195310 NASA

[8]

Cox BN, 1997, 4750 NASA

[9]

DEBAERE I, 2008, THESIS GENT U

[10] The interface between matrix pockets and fibre bundles under impact loading [J].

Gerlach, Robert ;

Pabst, Alexander ;

Petrinic, Nik ;

Hornig, Andreas ;

Wiegand, Jens ;

Siviour, Clive R. ;

Hufenbach, Werner .

COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (11-12) :2024-2026

← 1 2 3 4 →