HVM Metrology Challenges towards the 5 nm Node

被引：36

作者：

Bunday, Benjamin ^{[1
]}

机构：

[1] SUNY Poly SEMATECH, Albany, NY 12203 USA

来源：

METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXX | 2016年 / 9778卷

关键词：

metrology; gaps analysis; critical dimension; defect; films; CD-SEM; OCD; X-ray; EBI; CD-METROLOGY; DIELECTRIC-CONSTANT; BEAM INSPECTION; HIGH-ENERGY; MASK; MODEL; WAFER; ANGLE; TILT;

D O I：

10.1117/12.2218375

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

This paper will provide a high level overview of the future for in-line high volume manufacturing (HVM) metrology for the semiconductor industry. First, we will take a broad view of the needs of patterned defect, critical dimensional (CD/3D) and films metrology, and present the extensive list of applications for which metrology solutions are needed. Commonalities and differences among the various applications will be shown. We will then report on the gating technical limits of the most important of these metrology solutions to address the metrology challenges of future nodes, highlighting key metrology technology gaps requiring industry attention and investment.

引用

页数：34

共 50 条

[41] EUV local CDU healing performance and modeling capability towards 5nm node
Jee, Tae Kwon
Timoshkov, Vadim
Choi, Peter
Rio, David
Tsai, Yu-Cheng
Yaegashi, Hidetami
Koike, Kyohei
Fonseca, Carlos
Schoofs, Stijn
INTERNATIONAL CONFERENCE ON EXTREME ULTRAVIOLET LITHOGRAPHY 2017, 2017, 10450
[42] Challenges with SOT-MRAM integration towards N5 node and beyond
Gupta, M.
Perumkunnil, M.
Yasin, F.
Mirabelli, G.
Garello, K.
Gupta, A.
Furnemont, A.
Kar, G. S.
DTCO AND COMPUTATIONAL PATTERNING, 2022, 12052
[43] Hybrid Metrology & 3D-AFM Enhancement for CD Metrology Dedicated to 28 nm Node and Below Requirements
Foucher, J.
Faurie, P.
Dourthe, L.
Irmer, B.
Penzkofer, C.
FRONTIERS OF CHARACTERIZATION AND METROLOGY FOR NANOELECTRONICS: 2011, 2011, 1395
[44] 7/5 nm Logic Manufacturing Capabilities and Requirements of Metrology
Bunday, Benjamin
Bello, A. F.
Solecky, Eric
Vaid, Alok
METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXXII, 2018, 10585
[45] Optical Metrology Solutions for 10nm Films Process Control Challenges
Mahendrakar, Sridhar
Vaid, Alok
Venkataraman, Kartik
Lenahan, Michael
Seipp, Steven
Fang, Fang
Saxena, Shweta
Hu, Dawei
Yoon, Nam Hee
Song, Da
Camp, Janay
Ren, Zhou
METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXX, 2016, 9778
[46] 32nm node USJ formation using rapid process optimization metrology
Borland, John O.
Kawasaki, Yoji
Halim, Jeffri
Chung, Brian
SOLID STATE TECHNOLOGY, 2008, 51 (07) : 38 - +
[47] Influences on accuracy of SEM based CD mask metrology with a view to the 32 nm node
Haessler-Grohne, W.
Frase, C. G.
Gnieser, D.
Bosse, H.
Richter, J.
Wiswesser, A.
EMLC 2008: 24TH EUROPEAN MASK AND LITHOGRAPHY CONFERENCE, 2008, 6792
[48] Long term performance of the DUV optical metrology tool for the 90nm node
Chacon, L
Doe, N
Eandi, R
Cin, PS
18TH EUROPEAN CONFERENCE ON MASK TECHNOLOGY FOR INTEGRATED CIRCUITS AND MICROCOMPONENTS, 2002, 4764 : 151 - 160
[49] Metrology challenges for 45-nm strained-Sei device technology
Vartanian, Victor
Zollner, Stefan
Thean, A. V. -Y.
White, T.
Nguyen, B. -Y.
Prabhu, L.
Eades, D.
Parsons, S.
Desjardins, H.
Kim, K.
Jiang, Z. -X
Dhandapani, V.
Hildreth, J.
Powers, R.
Spencer, G.
Ramani, N.
Kottke, M.
Canonico, M.
Wang, X. -D.
Contreras, L.
Theodore, D.
Gregory, R.
Venkatesan, S.
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 2006, 19 (04) : 381 - 390
[50] Phase metrology on 45-nm node phase-shift mask structures
Lee, Kyung M.
Tavassoli, Malahat
Buttgereit, Ute
Seidel, Dirk
Birkner, Robert
Perlitz, Sascha
METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXII, PTS 1 AND 2, 2008, 6922 (1-2):

← 1 2 3 4 5 →