HVM Metrology Challenges towards the 5 nm Node

被引：37
作者：
Bunday, Benjamin [1 ]
机构：
[1] SUNY Poly SEMATECH, Albany, NY 12203 USA
来源：
METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXX | 2016年 / 9778卷
关键词：
metrology; gaps analysis; critical dimension; defect; films; CD-SEM; OCD; X-ray; EBI; CD-METROLOGY; DIELECTRIC-CONSTANT; BEAM INSPECTION; HIGH-ENERGY; MASK; MODEL; WAFER; ANGLE; TILT;
D O I：
10.1117/12.2218375
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
This paper will provide a high level overview of the future for in-line high volume manufacturing (HVM) metrology for the semiconductor industry. First, we will take a broad view of the needs of patterned defect, critical dimensional (CD/3D) and films metrology, and present the extensive list of applications for which metrology solutions are needed. Commonalities and differences among the various applications will be shown. We will then report on the gating technical limits of the most important of these metrology solutions to address the metrology challenges of future nodes, highlighting key metrology technology gaps requiring industry attention and investment.
引用
收藏
页数：34
相关论文
共 108 条
[31]  
Cordes A, 2011, P SPIE, V8105
[32]   Defect metrology challenges at the 11nm node and beyond [J].
Crimmins, Timothy F. .
METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXIV, 2010, 7638
[33]   Patterning of defect arrays with e-beam lithography used to develop a high throughput e-beam defect inspection tool [J].
Cummings, Kevin D. ;
Bunday, Ben ;
Malloy, Matt ;
Hartley, John ;
Banu, Laila ;
Mellish, M. ;
Chao, Weilun ;
Bleier, A. R. ;
Banerjee, A. .
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2015, 33 (06)
[34]   Metrology Characterization of spacer double patterning by scatterometry [J].
Dasari, Prasad ;
Li, Jie ;
Hu, Jiangtao ;
Liu, Zhuan ;
Kritsun, Oleg ;
Volkman, Catherine .
METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXV, PT 1 AND PT 2, 2011, 7971
[35]   Comparison of spectroscopic Mueller polarimetry, standard scatterometry and real space imaging techniques (SEM and 3D-AFM) for dimensional characterization of periodic structures [J].
De Martino, A. ;
Foldyna, M. ;
Novikova, T. ;
Cattelan, D. ;
Barritault, P. ;
Licitra, C. ;
Hazart, J. ;
Foucher, J. ;
Bogeat, F. .
METROLOGY, INSPECTION, AND PROCESS CONTROL FOR MICROLITHOGRAPHY XXII, PTS 1 AND 2, 2008, 6922 (1-2)
[36]   Concept of dielectric constant for nanosized systems [J].
Delerue, C ;
Lannoo, M ;
Allan, G .
PHYSICAL REVIEW B, 2003, 68 (11)
[37]  
Diebold A., 2011, P SPIE, V7971-01
[38]  
Diebold AC, 2003, SOLID STATE TECHNOL, V46, P63
[39]   Traceable calibration of a critical dimension atomic force microscope [J].
Dixson, Ronald ;
Orji, Ndubuisi G. ;
McGray, Craig D. ;
Bonevich, John ;
Geist, Jon .
JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS, 2012, 11 (01)
[40]  
Doyle B., 2003, 2003 Symposium on VLSI Technology. Digest of Technical Papers (IEEE Cat. No.03CH37407), P133, DOI 10.1109/VLSIT.2003.1221121
12345678910