Microfabrication of Ni-Fe Mold Insert via Hard X-ray Lithography and Electroforming Process

In this research, a Ni-Fe mold insert for the efficient replication of high aspect-ratio microstructure arrays was fabricated via hard X-ray lithography and an electroforming process. For the X-ray exposure on a photoresist, a gold-based X-ray mask was prepared with conventional UV photolithography. The gold thickness was designed to be over 15 mu m to prevent development underneath the absorber and to enhance the adhesion strength between the photoresist and substrate. By using the X-ray mask, a positive-type photoresist was selectively exposed to X-ray under an exposure energy of 4 kJ/cm(3). Thereafter, the exposed region was developed in a downward direction to effectively remove the residual photoresist from the substrate. During the evaporation process, deionized water mixed with a surface additive prevented the bending and clustering of the photoresist microstructure arrays by lowering the capillary force, resulting in a defect-free mother structure for electroforming. Lastly, the mother structure was uniformly Ni-Fe electroformed on a conductive substrate without the formation of any pores or detachment from the substrate. Based on the proposed microfabrication process, a Ni-Fe mold insert with a 183 mu m pattern size, 68 mu m gap size, 550 mu m height, 2116 microcavities and a hardness of 585 Hv was precisely manufactured. It can be utilized for the mass production of high aspect ratio metal and ceramic microstructure arrays in micro molding technologies.