Effect Of Rolling On Ni-Ti-Fe Shape Memory Alloys Prepared Through Novel Powder Metallurgy Route

被引：8

作者：

Gupta, Gaurav Kumar ^{[1
]}

Patel, Krishan Kumar ^{[2
]}

Purohit, Rajesh ^{[2
]}

Bhagoria, Palak ^{[3
]}

机构：

[1] CSIR, AMPRI, Bhopal, India

[2] Maulana Azad Natl Inst Technol, Mech Engn Dept, Bhopal, India

[3] RGPV, Mech Engn Dept, Bhopal, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 04期

关键词：

Nickel; Titanium; Iron powders; Shape memory alloys (SMA); hot pressing; XRD; DSC; and hot rolling; SMAS;

D O I：

10.1016/j.matpr.2017.05.050

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study is concentrated on the preparation of Ni-Ti shape memory alloys with the addition of different atomic wt.% of iron in place of atomic wt.% of Nickel through novel powder metallurgy route. Further rolling was done on hot pressed sample in rolling mill. The microstructure and the mechanical properties of the hot pressed and further rolled sample of Ni-Ti and Ni-Ti-Fe were studied. The DSC and XRD analysis was also done on the hot pressed and rolled samples. The samples were prepared by the powders of Nickel, Titanium and Iron mixed in hexagonal trembler and further cold compaction on hydraulic press. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：5385 / 5397

页数：13

共 20 条

[1] Development of Ni-Ti Shape Memory Alloys through Novel Powder Metallurgy Route and Effect of Rolling on their properties
Purohit, Rajesh
Patel, Krishan Kumar
Gupta, Gaurav Kumar
Rana, R. S.
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (04) : 5330 - 5335
[2] Two-way shape memory effect induced by cold-rolling in Ti-Ni and Ti-Ni-Fe alloys
Wang, JJ
Omori, T
Sutou, Y
Kainuma, R
Ishida, K
SCRIPTA MATERIALIA, 2005, 52 (04) : 311 - 316
[3] Dynamic recrystallization in a Ni-Ti-Fe shape memory alloy: Effects on austenite-martensite phase transformation
Basu, Ritwik
Jain, Lokendra
Maji, Bikas
Krishnan, Madangopal
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 639 : 94 - 101
[4] Mossbauer spectroscopy and magnetic measurements on Fe-Ni-Co-Ti shape memory alloys
Tolea, F.
Schinteie, G.
Popescu, B.
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2006, 8 (04): : 1502 - 1506
[5] Characterization and process evaluation of Ni-Ti-Fe shape memory alloy macro-spheres directly fabricated via rotating electrode process
Basak, C. B.
Krishnan, Madangopal
Kumar, Rakesh
Abdullah, K. K.
Anantharaman, S.
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 597 : 15 - 20
[6] Superelastic behavior of novel Ni-Ti-Co shape memory alloys for seismic applications
Hong, Huanpeng
Gencturk, Bora
Saiidi, M. Saiid
SMART MATERIALS AND STRUCTURES, 2025, 34 (01)
[7] Microstructural investigation on marforming and conventional cold deformation in Ni-Ti-Fe-based shape memory alloys
Basu, Ritwik
Szpunar, Jerzy
Eskandari, Mostafa
Mohtadi-Bonab, M. A.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2015, 106 (08) : 852 - 862
[8] Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application
Li, H. F.
Qiu, K. J.
Zhou, F. Y.
Li, L.
Zheng, Y. F.
SCIENTIFIC REPORTS, 2016, 6
[9] Effect of Ti addition on the mechanical properties and the magnetocaloric effect of Ni-Mn-In metamagnetic shape memory alloys
Sanchez-Alarcos, V.
Perez-Landazabal, J. I.
Recarte, V.
Urdiain, A.
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2015, 48 (44)
[10] Influence of mechanically alloyed fraction and hot rolling temperature in the last pass on the structure of Fe-14Mn-6Si-9Cr-5Ni (mass. %) shape memory alloys processed by powder metallurgy
Pricop, B.
Ozkal, B.
Soyler, U.
Van Humbeeck, J.
Lohan, N. M.
Suru, M. G.
Bujoreanu, L. -G.
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2014, 8 (3-4): : 247 - 250

← 1 2 →