WEAR BEHAVIOUR OF ALUMINUM MATRIX SIC PARTICLE REINFORCED COMPOSITE CAM PROFILE UNDER DRY SLIDING CONDITION

被引：0

作者：

Cerit, A. A. ^{[1
,3
]}

Nair, F. ^{[2
,3
]}

Karamis, M. B. ^{[2
,3
]}

机构：

[1] Erciyes Univ, Dept Ind Design Engn, Kayseri, Turkey

[2] Erciyes Univ, Dept Mech Engn, Kayseri, Turkey

[3] Erciyes Univ, Composite Mat Res Lab, Kayseri, Turkey

来源：

JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION | 2015年 / 21卷 / 01期

关键词：

metal matrix composite; wear; camshaft; powder metallurgy; lightweight; LIGHTWEIGHT MATERIALS; VOLUME FRACTION; SIZE; ALLOYS;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this study, ceramic particle reinforced metal matrix composites camshaft profiles were manufactured to determine their wear behaviour. AA2124 aluminum matrix powders (25 mu m) were reinforced by SiC (20 mu m) with 10 to 30% volume fraction. For comparison, unreinforced cam profiles were manufactured. Mixed powders were compressed at 300 MPa and 615 degrees C for 30 min in an argon atmosphere. Wear tests were made at 75 N dead loading with 500 rpm revolution for 30 min under dry condition using special designed wear tester for cam profile.

引用

页码：186 / 194

页数：9

共 18 条

[1] Benedyk JC, 2010, WOODHEAD PUBL MATER, P79, DOI 10.1533/9781845697822.1.79
[2] CERIT A., 2006, J BALK TRIBOL ASSOC, V10, P383
[3] Cerit AA, 2008, J BALK TRIBOL ASSOC, V14, P482
[4] Investigation of the low-speed impact behavior of dual particle size metal matrix composites
Cerit, Afsin Alper
[J]. MATERIALS & DESIGN, 2014, 57 : 330 - 335
[5] LIGHTWEIGHT MATERIALS FOR AUTOMOTIVE APPLICATIONS
COLE, GS
SHERMAN, AM
[J]. MATERIALS CHARACTERIZATION, 1995, 35 (01) : 3 - 9
[6] LIGHTWEIGHT MATERIALS FOR AIRCRAFT APPLICATIONS
IMMARIGEON, JP
HOLT, RT
KOUL, AK
ZHAO, L
WALLACE, W
BEDDOES, JC
[J]. MATERIALS CHARACTERIZATION, 1995, 35 (01) : 41 - 67
[7] Hybrid Aluminium Metal Matrix Composite Reinforced With SiC and TiB2
James, Johny S.
Venkatesan, K.
Kuppan, P.
Ramanujam, R.
[J]. 12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1018 - 1026
[8] The effects of different ceramics size and volume fraction on wear behavior of Al matrix composites (for automobile cam material)
Karamis, M. B.
Cerit, A. Alper
Selcuk, Burhan
Nair, Fehmi
[J]. WEAR, 2012, 289 : 73 - 81
[9] The metallurgical and deformation behaviours of laminar metal matrix composites after ballistic impact
Karamis, M. B.
Nair, F.
Cerit, A. A.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (10) : 4880 - 4889
[10] Manufacturing of lightweight components by metal forming
Kleiner, M
Geiger, M
Klaus, A
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2003, 52 (02) : 521 - 542

← 1 2 →