Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool

被引:106
作者
Andolfatto, L. [1 ,2 ]
Lavernhe, S. [1 ]
Mayer, J. R. R. [2 ]
机构
[1] Ecole Normale Super, Lab Univ Rech Prod Automatisee, F-94230 Cachan, France
[2] Ecole Polytech, Dept Mech Engn, Montreal, PQ H3C 3A7, Canada
关键词
Machine tool; Geometric errors; Servo errors; Dynamic errors; High-speed machining; LINK ERRORS; IDENTIFICATION; COMPENSATION; OPTIMIZATION; PERFORMANCE; CALIBRATION;
D O I
10.1016/j.ijmachtools.2011.07.002
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Many sources of errors exist in the manufacturing process of complex shapes. Some approximations occur at each step from the design geometry to the machined part. The aim of the paper is to present a method to evaluate the effect of high-speed and high dynamic load on volumetric errors at the tool center point. The interpolator output signals and the machine encoder signals are recorded and compared to evaluate the contouring errors resulting from each axis follow-up error. The machine encoder signals are also compared to the actual tool center point position as recorded with a non-contact measuring instrument called CapBall to evaluate the total geometric errors. The novelty of the work lies in the method that is proposed to decompose the geometric errors into two categories: the quasi-static geometric errors independent from the speed of the trajectory and the dynamic geometric errors, dependent on the programmed feed rate and resulting from the machine structure deflection during the acceleration of its axes. The evolution of the respective contributions for contouring errors, quasi-static geometric errors and dynamic geometric errors is experimentally evaluated and a relation between programmed feed rate and dynamic errors is highlighted. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:787 / 796
页数:10
相关论文
共 50 条
[31]   Spindle Thermal Error Optimization Modeling of a Five-axis Machine Tool [J].
Guo, Qianjian ;
Fan, Shuo ;
Xu, Rufeng ;
Cheng, Xiang ;
Zhao, Guoyong ;
Yang, Jianguo .
CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2017, 30 (03) :746-753
[32]   Machine tool analyzer: a device for identifying 13 position-independent geometric errors for five-axis machine tools [J].
Yang, Seung-Han ;
Lee, Kwang-Il .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (9-10) :2945-2957
[33]   Volumetric error modeling and sensitivity analysis for designing a five-axis ultra-precision machine tool [J].
Chen, Guoda ;
Liang, Yingchun ;
Sun, Yazhou ;
Chen, Wanqun ;
Wang, Bo .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 68 (9-12) :2525-2534
[34]   Geometric Error Measurement of Rotary Axes on Five-Axis Machine Tools: A Review [J].
Chen, Yu-Ta ;
Liu, Chien-Sheng ;
Shiau, Wen-Chi ;
Xie, Hao-Feng ;
Chiu, Chun-Li ;
Yan, Qing-Hsien ;
Lee, Bo-Kuan ;
Chen, Ting-Han ;
Huang, Yu-Yang .
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2024, 25 (06) :1311-1332
[35]   Error identification method of five-axis machine tool based on sample test method [J].
Lv, Xuehu ;
Guo, Qianjian ;
Yuan, Wei ;
Wang, Wenhua ;
Zhu, Yuqi ;
Wang, Haotian .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (11-12) :8069-8075
[36]   Repeatability of on-machine probing by a five-axis machine tool [J].
Sepahi-Boroujeni, Saeid ;
Mayer, J. R. R. ;
Khameneifar, Farbod .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2020, 152
[37]   Five-axis Machine Tool Backlash Error Detection System Using Photoelectric Sensor [J].
Hsieh, Tung-Hsien ;
Chou, Yi-Hao ;
Lai, Hsin-Yu ;
Chien, Yu-Chen .
SENSORS AND MATERIALS, 2024, 36 (07) :2813-2834
[38]   Axis location errors and error motions calibration for a five-axis machine tool using the SAMBA method [J].
Mchichi, N. Alami ;
Mayer, J. R. R. .
6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014), 2014, 14 :305-310
[39]   Geometric error modeling and compensation for five-axis CNC gear profile grinding machine tools [J].
Zhou, Baocang ;
Wang, Shilong ;
Fang, Chenggang ;
Sun, Shouli ;
Dai, He .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (5-8) :2639-2652
[40]   Ballbar dynamic tests for rotary axes of five-axis CNC machine tools [J].
Lei, Wei-Tai ;
Wang, Wen-Chung ;
Fang, Tien-Ching .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2014, 82-83 :29-41