Effect of the powder particle size on the wear behavior of boronized AISI 304 stainless steel

被引：9

作者：

Gunen, Ali ^{[1
]}

Kucuk, Yilmaz ^{[2
]}

Er, Yusuf

Cay, V. Veli

Oge, Mecit ^{[2
]}

Gok, M. Sabri ^{[2
]}

机构：

[1] Mustafa Kemal Univ, Fac Technol, Dept Met & Mat Engn, Antakya, Turkey

[2] Bartin Univ, Fac Engn, Dept Mech Engn, Bartin, Turkey

来源：

MATERIALS TESTING | 2015年 / 57卷 / 05期

关键词：

Boriding; nanoboron; microabrasion; heat treatment; abrasive wear; STAINLESS-STEEL; MECHANICAL-PROPERTIES; ABRASIVE WEAR; KINETICS;

D O I：

10.3139/120.110732

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this study, the AISI 304 steel specimens were boronized with nanoboron of the size of 10-50 nm and commercial Ekabor 3 powders (<1400 mu m) at 950 degrees C to 1000 degrees C for 2 h and 4 h. Boronized steel specimens were characterized via SEM, microhardness and XRD analyses. Abrasive wear behavior of the specimens, boronized at different temperatures and treatment durations, were examined. The fixed ball micro-abrasion tests were carried out using the abrasive slurry, prepared with different SiC powder particle sizes on the boronized specimens at different rotational speeds. The specimens boronized with nanoboron powders exhibited a higher hardness and abrasive wear resistance than the samples boronized with the Ekabor 3 powders.

引用

页码：468 / 473

页数：6

共 17 条

[1] The effects of conventional heat treatment and boronizing on abrasive wear and corrosion of SAE 1010, SAE 1040, D2 and 304 steels [J].

Atik, E ;

Yunker, U ;

Meriç, C .

TRIBOLOGY INTERNATIONAL, 2003, 36 (03) :155-161

[2] Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steel [J].

Balusamy, T. ;

Narayanan, T. S. N. Sankara ;

Ravichandran, K. ;

Park, Il Song ;

Lee, Min Ho .

SURFACE & COATINGS TECHNOLOGY, 2013, 232 :60-67

[3] Pack-boriding of Fe-Mn binary alloys: Characterization and kinetics of the boride layers [J].

Bektes, M. ;

Calik, A. ;

Ucar, N. ;

Keddam, M. .

MATERIALS CHARACTERIZATION, 2010, 61 (02) :233-239

[4]

Caliskan H., 2013, MATER TECHNOL, V47, P1

[5] Evaluation of boron mobility on the phases FeB, Fe2B and diffusion zone in AISI 1045 and M2 steels [J].

Campos, I. ;

Ramirez, G. ;

Figueroa, U. ;

Martinez, J. ;

Morales, O. .

APPLIED SURFACE SCIENCE, 2007, 253 (07) :3469-3475

[6] Investigation of Microabrasion Wear Behavior of Boronized Stainless Steel with Nanoboron Powders [J].

Gunen, Ali ;

Gok, M. Sabri ;

Erdogan, Azmi ;

Kurt, Bulent ;

Orhan, Nuri .

TRIBOLOGY TRANSACTIONS, 2013, 56 (03) :400-409

[7] Influence of the pack thickness of the boronizing mixture on the boriding of steel [J].

Jain, V ;

Sundararajan, G .

SURFACE & COATINGS TECHNOLOGY, 2002, 149 (01) :21-26

[8] A Comparative Study of the Microabrasion Wear Behavior of CoNiCrAlY Coatings Fabricated by APS, HVOF, and CGDS Techniques [J].

Karaoglanli, A. C. ;

Caliskan, H. ;

Gok, M. S. ;

Erdogan, A. ;

Turk, A. .

TRIBOLOGY TRANSACTIONS, 2014, 57 (01) :11-17

[9] Simulation of the growth kinetics of the (FeB/Fe2B) bilayer obtained on a borided stainless steel [J].

Keddam, M. .

APPLIED SURFACE SCIENCE, 2011, 257 (06) :2004-2010

[10] Adhesive and abrasive wear behaviour of TiC alloyed, sintered, austenitic stainless steels [J].

Korkut, M. H. ;

Koc, V. ;

Gok, M. S. .

TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2007, 1 (04) :173-180

← 1 2 →