Mechanistic considerations of oxygen enhanced crack growth in Inconel 718

被引：0
|
作者：
Wei, RP [1 ]
Huang, ZF [1 ]
Miller, CF [1 ]
Simmons, GW [1 ]
机构：
[1] Lehigh Univ, Dept Mech Engn & Mech, Sinclair Lab, Bethlehem, PA 18015 USA
来源：
SUPERALLOYS 718, 625, 706 AND VARIOUS DERIVATIVES | 2001年
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A coordinated, multidisciplinary study was conducted to elucidate the mechanism for oxygen enhanced crack growth in Inconel 718 at high temperatures. Sustained-load tests were conducted in high-purity argon and oxygen, at 873 to 973 K, to characterize the kinetics of crack growth. The reactivity of the alloy, Nb, NbC and Ni3Nb with oxygen was determined by x-ray photoelectron spectroscopy (XPS). Crack growth experiments, in oxygen at 973 K, were interrupted and the specimens were charged with hydrogen and fractured in UHV to determine the state of oxidation of various elements, particularly ahead of the crack tip. The existence of a damage zone ahead of the crack tip had been demonstrated previously by reloading interrupted specimens of comparable alloys in argon at lower temperatures and stress intensity levels. A mechanism for oxygen enhanced crack growth in Inconel 718, based on the formation of a brittle niobium oxide film ahead of the crack tip from the oxidation of grain boundary Ni3Nb and Nb-rich carbides, is proposed and discussed.
引用
收藏
页码：691 / 700
页数：10
相关论文
共 50 条
  • [21] Influence of stress state on high temperature fatigue crack growth in Inconel 718
    Antunes, FV
    Ferreira, JM
    Branco, CM
    Byrne, J
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2001, 24 (02) : 127 - 135
  • [22] Grain Size Depending Dwell-Fatigue Crack Growth in Inconel 718
    Saarimaki, Jonas
    Lundberg, Mattias
    Moverare, Johan J.
    ADVANCED ENGINEERING MATERIALS, 2018, 20 (06)
  • [23] Fatigue crack growth behavior of Inconel 718 produced by selective laser melting
    Konecna, R.
    Kunz, L.
    Nicoletto, G.
    Baca, A.
    FRATTURA ED INTEGRITA STRUTTURALE, 2016, (35): : 31 - 40
  • [24] Fatigue crack growth behaviour of Inconel 718 with high temperature hold times
    Gustafsson, David
    Moverare, Johan
    Johansson, Sten
    Hornqvist, Magnus
    Simonsson, Kjell
    Sjostrom, Soren
    Sharifimajda, Babak
    FATIGUE 2010, 2010, 2 (01): : 1095 - 1104
  • [25] Micromechanisms of fatigue crack growth in a forged Inconel 718 nickel-based superalloy
    Mercer, C
    Soboyejo, ABO
    Soboyejo, WO
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 270 (02): : 308 - 322
  • [26] Effect of processing/microstructure on the threshold fatigue crack growth behavior of Inconel 718 forging
    Lawless, BH
    Dix, AW
    SUPERALLOYS 718, 625, 706 AND VARIOUS DERIVATIVES, 1996, : 575 - 575
  • [27] Short crack initiation and growth at 600 °C in notched specimens of Inconel718
    Connolley, T
    Reed, PAS
    Starink, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 340 (1-2): : 139 - 154
  • [28] Phase composition and fatigue crack growth behavior of Inconel 718 under additive manufacturing
    Rashkovets, Mariia
    Kislov, Nikita
    Gushchina, Marina
    Nikulina, Aelita
    Popelukh, Albert
    Klimova-Korsmik, Olga
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 851
  • [29] FATIGUE-CRACK GROWTH IN INCONEL-718 WELDMENTS AT ELEVATED-TEMPERATURES
    JAMES, LA
    WELDING JOURNAL, 1978, 57 (01) : S17 - S23
  • [30] Micromechanisms of fatigue crack growth in a forged Inconel 718 nickel-based superalloy
    Mercer, C.
    Soboyejo, A.B.O.
    Soboyejo, W.O.
    Materials Science and Engineering: A, 1999, 270 (02): : 308 - 322
12345