Performance analysis of Ti2AlN superimposed WC cutting tool

被引:2
作者
Kumar, Aswani Sasi [1 ]
Badhirappan, Geetha Priyadarshini [1 ]
Ronadson, Bibeye Jahaziel [2 ]
Vijayan, Krishnaraj [2 ]
机构
[1] PSG Inst Adv Studies, Nanotech Res Innovat & Incubat Ctr, Coimbatore, Tamil Nadu, India
[2] PSG Coll Technol, Dept Prod Engn, Coimbatore 641004, Tamil Nadu, India
关键词
Ti-6Al-4; V; Ti2AlN; RSM; Tungsten carbide; SURFACE-ROUGHNESS; MECHANICAL-PROPERTIES; MACHINING PARAMETERS; THIN-FILMS; GRAIN-SIZE; STEEL; ALLOY; WEAR; DRY; POLYCRYSTALLINE;
D O I
10.1016/j.jmapro.2022.07.060
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This article presents the development of superimposed Ti2AlN MAX phase coatings on cutting tools through reactive co-sputtering technique in dry machining of Ti-6Al-4 V. The effect of varying nitrogen flow rate during the reactive co-sputtering process and its influence on cutting properties has also been discussed. The predictive modeling along with validation of experimental results were carried out using response surface methodology (RSM) and optimized condition for cutting force were obtained using composite desirability function. Machining studies using the superimposed Ti2AlN coatings reduced the cutting force by 23-35 % when compared to commercial coatings. Investigation of cutting mechanics revealed an increase of shear angle by 3-5 % and decrease in friction angle by 20 %. The superimposed MAX phase coatings also reduced the friction coefficient by 34 % during dry turning of Ti-6Al-4 V. The superimposed Ti2AlN coatings were held responsible to improve the performance of the tool by 21-30 % in terms of tool life when compared to commercial tool. It could be inferred that the superimposed Ti2AlN coatings reduced the effect of chemical affinity between the tool and workpiece, eliminating the formation of built-up edge at rake face of the tool.
引用
收藏
页码:306 / 318
页数:13
相关论文
共 50 条
[41]   Synthesis and Characterization of a Nearly Single Bulk Ti2AlN MAX Phase Obtained from Ti/AlN Powder Mixture through Spark Plasma Sintering [J].
Salvo, Christopher ;
Chicardi, Ernesto ;
Poyato, Rosalia ;
Garcia-Garrido, Cristina ;
Jimenez, Jose Antonio ;
Lopez-Pernia, Cristina ;
Tobosque, Pablo ;
Mangalaraja, Ramalinga Viswanathan .
MATERIALS, 2021, 14 (09)
[42]   Production of honeycomb-patterned hybrid Ti2AlN/TiNi films and examination of Mechanical, Tribological, Adhesion and Fatigue properties [J].
Duran, Semih ;
Cicek, Hikmet .
SURFACES AND INTERFACES, 2025, 56
[43]   Numerical analysis performance of microbump cutting tool in hot machining Ti-6Al-4V [J].
Liu, Xin ;
Zhang, Xu .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (3-4) :2005-2021
[44]   A combined experimental and modeling study revealing the anisotropic mechanical response of Ti2AlN MAX phase [J].
Li, Xiaoqiang ;
Malzbender, Juergen ;
Yan, Gang ;
Gonzalez-Julian, Jesus ;
Schwaiger, Ruth .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2021, 41 (12) :5872-5881
[45]   Dense and high-stability Ti2AlN MAX phase coatings prepared by the combined cathodic arc/sputter technique [J].
Wang, Zhenyu ;
Liu, Jingzhou ;
Wang, Li ;
Li, Xiaowei ;
Ke, Peiling ;
Wang, Aiying .
APPLIED SURFACE SCIENCE, 2017, 396 :1435-1442
[46]   Influence of the mechanical activation process on the corrosion of Ti2AlN MAX phase obtained by hot pressing [J].
Salvo, C. ;
Guerra, C. ;
Maril, M. ;
Sancy, M. .
CERAMICS INTERNATIONAL, 2025, 51 (04) :5425-5433
[47]   In situ Ti2AlN reinforced TiAl-based composite with a novel network structure: Microstructure and flexural property at elevated temperatures [J].
Wang, Daqun ;
Sun, Dongli ;
Han, Xiuli ;
Wang, Qing .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 742 :231-240
[48]   Microstructure evolution of polycrystalline Ti2AlN MAX phase film during post-deposition annealing [J].
Wang, Tao ;
Chen, Zhe ;
Wang, Guoqing ;
Wang, Lei ;
Zhang, Guojun .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (15) :4892-4898
[49]   Investigation on the crystallographic orientation relationships and interface atomic structures in an in-situ Ti2AlN/TiAl composite [J].
Liu, Pei ;
Sun, Dongli ;
Han, Xiuli ;
Wang, Qing .
MATERIALS & DESIGN, 2017, 130 :239-249
[50]   Epitaxial Ti2AlN(0001) thin film deposition by dual-target reactive magnetron sputtering [J].
Persson, P. O. A. ;
Kodambaka, S. ;
Petrov, I. ;
Hultman, L. .
ACTA MATERIALIA, 2007, 55 (13) :4401-4407