Bragg grating sensor for refractive index based on a D-shaped circular photonic crystal fiber

In this paper, a silica-based D-shaped circular photonic crystal fiber Bragg grating sensor for refractive index sens-ing is proposed theoretically. D-shaped fiber construction can effectively enhance the coupling effect between the guiding mode and external liquid analyte, which then causes a distinct shift in the typical reflection spectrum as the refractive index of the analyte varies. This design exhibits highly improved sensitivity of 487 nm/RIU in a large refractive index range from 1.30 to 1.40 compared with the previous fiber grating sensors. Study of the dependence of sensing performance on the structure parameters suggests that the resonance peak shifts towards longer wave-lengths with the increased air-hole diameter of fiber, while it is almost immobile as the hole spacing and the number of air-hole layers change in a certain range. For the influence of the Bragg grating structure, results show that the resonance peak is not sensitive to the grating length, but linearly increases as the grating period expands. The effects of polishing depth and fiber preparation error on the sensor are also discussed in detail. This high-sensitivity sen-sor based on a D-shaped photonic crystal fiber and Bragg grating has great potential in biochemical detection, environmental monitoring, and medical sensing. (c) 2022 Optica Publishing Group