In-situ synchrotron diffraction and digital image correlation technique for characterizations of retained austenite stability in low-alloyed transformation induced plasticity steel

被引：17
作者：
Brauser, S. [1 ]
Kromm, A. [1 ]
Kannengiesser, Th. [1 ]
Rethmeier, M. [1 ]
机构：
[1] BAM Fed Inst Mat Res & Testing, D-12205 Berlin, Germany
来源：
SCRIPTA MATERIALIA | 2010年 / 63卷 / 12期
关键词：
Transformation induced plasticity; In-situ synchrotron diffraction; Austenite stability; Digital image correlation; X-RAY-DIFFRACTION; TRIP-STEEL; MARTENSITIC-TRANSFORMATION; DEFORMATION-BEHAVIOR; SHEET STEEL; MICROSTRUCTURE; SILICON;
D O I：
10.1016/j.scriptamat.2010.08.007
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Direct measurement and quantification of phase transformation in a low-alloyed transformation induced plasticity steels depending on the tensile load as well as determination of the real true stress and true strain values were carried out in-situ using high energy synchrotron radiation. Digital image correlation technique was used to quantify more precisely the true strain values. The aim of the work was to obtain a better understanding of the phase transformation of commercial low-alloyed transformation induced plasticity steel depending on the true strain and true stress values. (c) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1149 / 1152
页数：4
相关论文
共 24 条
  • [1] Effects of nitrogen on the mechanical properties of cold rolled TRIP-aided steel sheets
    Baik, Seung Chul
    Park, Sung-Ho
    Kwon, Hicion
    Kim, Dong-Ik
    Oh, Kyu Hwan
    [J]. ISIJ INTERNATIONAL, 2006, 46 (04) : 599 - 605
  • [2] Influence of rolling of TRIP steel in the intercritical region on the stability of retained austenite
    Basuki, A
    Aernoudt, E
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 90 : 37 - 43
  • [3] Analysis of the martensitic transformation at various scales in TRIP steel
    Berrahmoune, MR
    Berveiller, S
    Inal, K
    Moulin, A
    Patoor, E
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 378 (1-2): : 304 - 307
  • [4] A model for strain-induced martensitic transformation of TRIP steel with strain rate
    Dan, W. J.
    Zhang, W. G.
    Li, S. H.
    Lin, Z. Q.
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2007, 40 (01) : 101 - 107
  • [5] The materials science synchrotron beamline EDDI for energy-dispersive diffraction analysis
    Genzel, Ch.
    Denks, I. A.
    Gibmeler, J.
    Klaus, M.
    Wagener, G.
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2007, 578 (01) : 23 - 33
  • [6] Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase trip-assisted steels
    Girault, E
    Mertens, A
    Jacques, P
    Houbaert, Y
    Verlinden, B
    Van Humbeeck, J
    [J]. SCRIPTA MATERIALIA, 2001, 44 (06) : 885 - 892
  • [7] GRAJCAR A, 2007, J ACHIEVEMENTS MAT M, V20, P110
  • [8] PLASTIC STABILITY OF RETAINED AUSTENITE IN THE COLD-ROLLED 0.14-PERCENT-C-1.9-PERCENT-SI-1.7-PERCENT-MN SHEET STEEL
    ITAMI, A
    TAKAHASHI, M
    USHIODA, K
    [J]. ISIJ INTERNATIONAL, 1995, 35 (09) : 1121 - 1127
  • [9] Jacques P, 2001, PHILOS MAG A, V81, P1789, DOI 10.1080/01418610010009397
  • [10] JAQUES PJ, 2001, METALLURGICAL MAT A, V32, P2759
123