Room and elevated temperature shear strength of sealants for solid oxide fuel cells

被引：17
作者：
Osipova, T. [1 ]
Wei, J. [1 ]
Pecanac, G. [1 ]
Malzbender, J. [1 ]
机构：
[1] Forschungszentrum Julich GmbH, IEK 2, D-52425 Julich, Germany
来源：
CERAMICS INTERNATIONAL | 2016年 / 42卷 / 11期
关键词：
Solid oxide fuel cells; Sealants; Mechanical properties; Torsion; Shear strength; Creep; GLASS-CERAMIC SEALANTS; FORSCHUNGSZENTRUM JULICH; MECHANICAL-PROPERTIES; FRACTURE ENERGIES; COATINGS; BEHAVIOR; STACKS; TESTS;
D O I：
10.1016/j.ceramint.2016.05.064
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The shear strength of glass-ceramic sealants was measured in torsion to aid the developments of robust sealants that can withstand the combined complex stress situation typical for solid oxide fuel cell stacks. The specimens consisted of hour-glass-shaped samples, with the sealant layer in typical application relevant thickness between two steel plates. Partially crystallized sealant materials with either silver particles or 8YSZ fibers as filler material were tested and compared with respect to their shear strength and failure behavior at room and elevated temperatures up to 800 degrees C. The results emphasize the importance of interfacial bonding as well the effect of creep properties of sealant and steel substrates onto the testing results. An outlook on improvements of testing procedure and specimens' geometry is given. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：12932 / 12936
页数：5
相关论文
共 29 条
  • [11] Mechanical performance of reactive-air-brazed (RAB) ceramic/metal joints for solid oxide fuel cells at ambient temperature
    Kuhn, B.
    Wetzel, F. J.
    Malzbender, J.
    Steinbrech, R. W.
    Singheiser, L.
    [J]. JOURNAL OF POWER SOURCES, 2009, 193 (01) : 199 - 202
  • [12] Advanced measurement techniques to characterize thermo-mechanical aspects of solid oxide fuel cells
    Malzbender, J.
    Steinbrech, R. W.
    [J]. JOURNAL OF POWER SOURCES, 2007, 173 (01) : 60 - 67
  • [13] Curvature of planar solid oxide fuel cells during sealing and cooling of stacks
    Malzbender, J
    Wakui, T
    Steinbrech, RW
    [J]. FUEL CELLS, 2006, 6 (02) : 123 - 129
  • [14] Fracture and creep of glass-ceramic solid oxide fuel cell sealant materials
    Malzbender, J.
    Zhao, Y.
    Beck, T.
    [J]. JOURNAL OF POWER SOURCES, 2014, 246 : 574 - 580
  • [15] Flexural Strength and Viscosity of Glass Ceramic Sealants for Solid Oxide Fuel Cell Stacks
    Malzbender, J.
    Zhao, Y.
    [J]. FUEL CELLS, 2012, 12 (01) : 47 - 53
  • [16] Determination of the interfacial fracture energies of cathodes and glass ceramic sealants in a planar solid-oxide fuel cell design
    Malzbender, J
    Steinbrech, RW
    Singheiser, L
    [J]. JOURNAL OF MATERIALS RESEARCH, 2003, 18 (04) : 929 - 934
  • [17] A review of advanced techniques for characterising SOFC behaviour
    Malzbender, J.
    Steinbrech, R. W.
    Singheiser, L.
    [J]. FUEL CELLS, 2009, 9 (06) : 785 - 793
  • [18] Cracking and residual stress in hybrid coatings on float glass
    Malzbender, J
    de With, G
    [J]. THIN SOLID FILMS, 2000, 359 (02) : 210 - 214
  • [19] The use of the indentation loading curve to detect fracture of coatings
    Malzbender, J
    de With, G
    [J]. SURFACE & COATINGS TECHNOLOGY, 2001, 137 (01) : 72 - 76
  • [20] Symmetric shear test of glass-ceramic sealants at SOFC operation temperature
    Malzbender, Juergen
    Moench, Josef
    Steinbrech, Rolf W.
    Koppitz, Thomas
    Gross, Sonja M.
    Remmel, Josef
    [J]. JOURNAL OF MATERIALS SCIENCE, 2007, 42 (15) : 6297 - 6301
123