SnS thin films grown by sulfurization of evaporated Sn layers: Effect of sulfurization temperature and pressure

被引：24

作者：

Caballero, R. ^{[1
]}

Conde, V. ^{[1
]}

Leon, M. ^{[1
]}

机构：

[1] Univ Autonoma Madrid, Dept Fis Aplicada, C Francisco Tomas & Valiente 7, E-28049 Madrid, Spain

来源：

THIN SOLID FILMS | 2016年 / 612卷

关键词：

SnS; Sulfurization; SnS2 secondary phase; Earth abundant; Solar cells; SOLAR-CELLS;

D O I：

10.1016/j.tsf.2016.06.018

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

SnS thin films were grown by sulfurization of Sn layers evaporated by electron beam. The effect of sulfurization parameters, such as temperature and pressure, on the properties of tin sulfide layers has been investigated. Ar pressure used during the sulfurization has a strong impact on the development of a proper SnS/Mo back interface. However, the sulfurization temperature is the parameter that regulates the formation of an orthorhombic single phase SnS thin film with the optimum properties to be used as absorber for solar cell devices. Sulfurization temperature of 220 degrees C for 240 min led to the formation of single phase tin sulfide layers. Direct band gap energy about 1.2 eV has been determined. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：202 / 207

页数：6

共 50 条

[21] Sulfurization Effect on Optical Properties of Cu2SnS3 Thin Films Grown by Two-Stage Process
Reddy, G. Phaneendra
Reddy, K. T. Ramakrishna
61ST DAE-SOLID STATE PHYSICS SYMPOSIUM, 2017, 1832
[22] Sulfurization and annealing effects on thermally evaporated CZTS films
Sripan, Chinnaiyah
Madhavan, Vinod E.
Viswanath, Annamraju Kasi
Ganesan, R.
MATERIALS LETTERS, 2017, 189 : 110 - 113
[23] Influence of sulfurization time and Cu-ZnS-Sn stack order on the properties of thermally evaporated CZTS thin films
Nagabhushan Jnaneshwar Choudhari
Sajan D. George
Y. Raviprakash
Journal of Materials Science: Materials in Electronics, 2022, 33 : 5341 - 5350
[24] Influence of sulfurization time and Cu-ZnS-Sn stack order on the properties of thermally evaporated CZTS thin films
Choudhari, Nagabhushan Jnaneshwar
George, Sajan D.
Raviprakash, Y.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2022, 33 (08) : 5341 - 5350
[25] Cu2ZnSnS4 thin films obtained by sulfurization of evaporated Cu2SnS3 and ZnS layers: Influence of the ternary precursor features
Robles, V.
Guillen, C.
Trigo, J. F.
Herrero, J.
APPLIED SURFACE SCIENCE, 2017, 400 : 220 - 226
[26] Sulfurization Growth and HCl Etching Processes for Cubic-Phase SnS Thin Films
Tosuke, Taichi
Sugiyama, Mutsumi
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2019, 216 (15):
[27] Synthesis of Cu2SnS3, Cu3SnS4, and Cu4SnS4 thin films by sulfurization of SnS-Cu layers at a selected temperature and /or Cu layers thickness
Avellaneda, D.
Paul, Albert
Shaji, S.
Krishnan, B.
JOURNAL OF SOLID STATE CHEMISTRY, 2022, 306
[28] Synthesis of Cu2SnS3, Cu3SnS4, and Cu4SnS4 thin films by sulfurization of SnS-Cu layers at a selected temperature and /or Cu layers thickness
Avellaneda D.
Paul A.
Shaji S.
Krishnan B.
Journal of Solid State Chemistry, 2022, 306
[29] Effects of Sulfurization Temperature on Properties of CZTS Films by Vacuum Evaporation and Sulfurization Method
Zhang, Jie
Long, Bo
Cheng, Shuying
Zhang, Weibo
INTERNATIONAL JOURNAL OF PHOTOENERGY, 2013, 2013
[30] Effect of precursor stacking order and sulfurization temperature on compositional homogeneity of CZTS thin films
Olgar, M. A.
Klaer, J.
Mainz, R.
Levcenco, S.
Just, J.
Bacaksiz, E.
Unold, T.
THIN SOLID FILMS, 2016, 615 : 402 - 408

← 1 2 3 4 5 →