Finite element modelling of the inertia friction welding of a CrMoV alloy steel including the effects of solid-state phase transformations

被引：16

作者：

Bennett, C. ^{[1
]}

机构：

[1] Univ Nottingham, Dept Mech Mat & Mfg Engn, Nottingham NG7 2RD, England

来源：

JOURNAL OF MANUFACTURING PROCESSES | 2015年 / 18卷

关键词：

Inertia friction welding; Finite element; Phase transformations; Residual stress; SIMULATION;

D O I：

10.1016/j.jmapro.2015.01.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Finite element (FE) process modelling of the inertia friction welding (IFW) between two tubular CrMoV components has been carried out using the DEFORM-2D (v10.2) software. This model has been validated against experimental test welds of the material; this included process data such as upset and rotational velocity as well as thermal data collected during the process using embedded thermocouples. The as-welded residual stress from the FE model has been compared to experimental measurements taken on the welded component using the hole drilling technique. The effects of the solid-state phase transformations which occur in the steel are considered and the trends in the residual stress measurements were well replicated when compared to the experimental data. (C) 2015 The Society of Manufacturing Engineers. Published by Elsevier Ltd. All rights reserved.

引用

页码：84 / 91

页数：8

共 15 条

[1] Modelling and simulation of the inertia friction welding of shafts [J].

Bennett, C. J. ;

Hyde, T. H. ;

Williams, E. J. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2007, 221 (L4) :275-284

[2] Finite element modelling of the inertia friction welding process between dissimilar materials [J].

D'Alvise, L ;

Massoni, E ;

Walloe, SJ .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 125 :387-391

[3]

Davé VR, 2001, WELD J, V80, p246S

[4] TEMPERATURE PROFILES, THE SIZE OF THE HEAT-AFFECTED ZONE AND DILUTION IN ELECTROSLAG WELDING [J].

DEBROY, T ;

SZEKELY, J ;

EAGAR, TW .

MATERIALS SCIENCE AND ENGINEERING, 1982, 56 (02) :181-193

[5] Finite element process modelling of inertia friction welding advanced nickel-based superalloy [J].

Grant, B. ;

Preuss, M. ;

Withers, P. J. ;

Baxter, G. ;

Rowlson, M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 513-14 :366-375

[6]

Lee K., 2001, NUMIFORM

[7]

Micro measurements, 2010, 11053 VISH PREC GROU

[8] FINITE-ELEMENT SIMULATION OF THE INERTIA WELDING OF 2 SIMILAR PARTS [J].

MOAL, A ;

MASSONI, E .

ENGINEERING COMPUTATIONS, 1995, 12 (06) :497-512

[9] Microstructure evolution modeling of FGH96 superalloy during inertia friction welding process [J].

Nie, Longfei ;

Zhang, Liwen ;

Zhu, Zhi ;

Xu, Wei .

FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2014, 80 :63-68

[10]

Preuss M, 2010, SOLIDS STATE WEDLING

← 1 2 →