Development of a dense electrolyte thin film by the ink-jet printing technique for a porous LSM substrate

被引：23

作者：

El-Toni, Ahmed Mohamed ^{[1
]}

Yamaguchi, Toshiaki ^{[1
]}

Shimizu, Sota ^{[2
]}

Fujishiro, Yoshinobu ^{[1
]}

Awano, Masanobu ^{[1
]}

机构：

[1] Natl Inst Adv Ind Sci & Technol, Tokyo, Japan

[2] FCRA, Moriyama Ku, Nagoya, Aichi, Japan

来源：

JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 2008年 / 91卷 / 01期

关键词：

D O I：

10.1111/j.1551-2916.2007.02151.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Recently, the fabrication and development of novel solid oxide fuel cell (SOFC) structures were conducted with the aim of enhancing power generation. Newly cathode-supported honeycomb-type SOFC with a promising power/volume ratio is under development. However, the conventional processing techniques used for the fabrication of different SOFC cell components (electrolyte and electrode) are not compatible with the newly constructed honeycomb structure. The ink-jet printing technique may offer the ability to design and fabricate SOFC components on honeycomb substrates and complex 3D structures. In this study, the formation of a dense Gadolinium-doped ceria thin film on a cathode-supported LaSrMnO3 substrate by the ink-jet printing technique was investigated.

引用

页码：346 / 349

页数：4

共 14 条

[1] Submicrometer patterning of charge in thin-film electrets [J].