Influence of number of layers on embedment strength of dowel-type connections for glulam and cross-laminated timber

被引：24
作者：
Tuhkanen, Eero [1 ]
Molder, Joosep [2 ]
Schickhofer, Gerhard [3 ]
机构：
[1] Tallinn Univ Technol, Dept Civil Engn & Architecture, Struct Engn Res Grp, Ehitajate Tee 5, EE-19086 Tallinn, Estonia
[2] Estonian Univ Life Sci, Dept Rural Bldg, Kreutzwaldi 1, EE-51006 Tartu, Estonia
[3] Graz Univ Technol, Inst Timber Engn & Wood Technol, Inffeldgasse 24-I, A-8010 Graz, Austria
来源：
ENGINEERING STRUCTURES | 2018年 / 176卷
关键词：
TO-GRAIN; WOOD;
D O I：
10.1016/j.engstruct.2018.09.005
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The purpose of this paper is to provide a better understanding of the embedment behaviour of dowel type fasteners in laminated timber. The influence of the number and thickness of the lamellas on embedment strength in glued laminated timber (GLT) and cross-laminated timber (CLT) is experimentally investigated and discussed. Full hole embedment tests in compression were conducted with specimens of equal properties (thickness, density), only with changes in the investigated parameter. The results show the embedment strength in CLT is influenced by locking effect of thinner crossed layers. In addition, the densification of crossed layers-the hardening effect-is clearly pronounced and leads to higher embedment stresses and strengths at larger dowel displacements. Stiffness values are presented in this paper but not discussed. The comparison of embedment strength values with well-known empirical models showed good agreement for GLT. In contrast, the results for CLT were far below the values calculated with existing models and are discussed in the paper. The findings are important to provide a safe and efficient joint to achieve more efficient use of CLT products.
引用
收藏
页码：361 / 368
页数：8
相关论文
共 25 条
  • [11] Hohenwarter J., 2014, THESIS
  • [12] Hubner U., 2013, THESIS
  • [13] ISO, 2016, MET MAT TENS TEST 1, P6892
  • [14] Johansen K.W., 1949, INT ASS BRIDGE STRUC, V9, P249, DOI DOI 10.5169/SEALS-9703
  • [15] Koponen S., 1991, EMBEDDING CHARACTERI
  • [16] Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber products
    Ringhofer, A.
    Brandner, R.
    Schickhofer, G.
    [J]. MATERIALS AND STRUCTURES, 2015, 48 (05) : 1435 - 1447
  • [17] Sandhaas C, 2013, EUR J WOOD WOOD PROD, V71, P599, DOI 10.1007/s00107-013-0718-z
  • [18] Sandhaas C, 2010, WORLD C TIMB ENG
  • [19] Determination of embedding strength of wood for dowel-type fasteners
    Sawata, K
    Yasumura, M
    [J]. JOURNAL OF WOOD SCIENCE, 2002, 48 (02) : 138 - 146
  • [20] Schmid M, 2002, THESIS
123