Detection of accelerated tool wear in turning

被引：19

作者：

Bombinski, Sebastian ^{[1
]}

Kossakowska, Joanna ^{[2
]}

Jemielniak, Krzysztof ^{[2
]}

机构：

[1] Kazimierz Pulaski Univ Technol & Humanities Radom, Ul Stasieckiego 54, PL-26600 Radom, Poland

[2] Warsaw Univ Technol, Narbutta 86, PL-02524 Warsaw, Poland

来源：

MECHANICAL SYSTEMS AND SIGNAL PROCESSING | 2022年 / 162卷

关键词：

Turning; Accelerated tool wear detection; Cutting force; Hierarchical time windows; ONLINE; FORCE; MODEL; PREDICTION; MACHINE; NETWORK; SIGNALS;

D O I：

10.1016/j.ymssp.2021.108021

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

There are many algorithms for the identification of gradual tool wear (GTW) which usually counts in minutes and the detection of catastrophic tool failure (CTF) which counts in milliseconds. However, the tool may lose its cutting ability by accelerated tool wear (ATW), which may last several seconds and cannot be sensed either by GTW or CTF detection algorithms. The paper presents an innovative algorithm for early detection of ATW and CTF. It consists in comparing the waveforms of the cutting force sensor signal in hierarchical time windows. The compared waveforms are independent of the absolute value of the signal. This allows the detection of ATWs of different intensity and duration. Tests proved that successful detection of ATW allows for prevention of CTF.

引用

页数：16

共 50 条

[41] Stability analysis of finite amplitude chatter in turning considering tool wear and process damping effects
Cai, Youhui
Zhuang, Kejia
Zhu, Kang
Wang, Xiao
JOURNAL OF MANUFACTURING PROCESSES, 2025, 141 : 773 - 788
[42] Turning Tool Wear Estimation Based on the Calculated Parameter Values of the Thermodynamic Subsystem of the Cutting System
Lapshin, Victor Petrovich
MATERIALS, 2021, 14 (21)
[43] Effects of magnetic assistance on improving tool wear resistance and cutting mechanisms during steel turning
Dehghani, Alireza
Amnieh, Sasan Khalaj
Tehrani, Alireza Fadaei
Mohammadi, Aminollah
WEAR, 2017, 384 : 1 - 7
[44] A diagnosis method of wear and tool life for an endmill by ultrasonic detection
Yao, C. W.
Chien, Y. X.
JOURNAL OF MANUFACTURING SYSTEMS, 2014, 33 (01) : 129 - 138
[45] Investigated iterative convergences of neural network for prediction turning tool wear
Chang, Wen-Yang
Wu, Sheng-Jhih
Hsu, Jia-Wei
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (7-8) : 2939 - 2948
[46] Initial Tool Wear Mechanism in Dry and Lubricated Turning of Inconel 718
Memarianpour, Morvarid
Niknam, Seyed Ali
Turenne, Sylvain
Balazinski, Marek
ADVANCES IN ENGINEERING RESEARCH AND APPLICATION, 2019, 63 : 390 - 397
[47] ATTEMPT TO PREDICT WEAR OF FLAT FORM CUTTING TOOL AT FORM TURNING
Pamintas, Eugen
MODTECH 2012: NEW FACE OF T M C R, VOLS I AND II, 2012, : 721 - 724
[48] Influence of tool wear on residual stresses when turning Inconel 718
Madariaga, A.
Kortabarria, A.
Hormaetxe, E.
Garay, A.
Arrazola, P. J.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY, 2016, 45 : 267 - 270
[49] Machinability Analysis and Optimization in Micro turning on tool wear for Titanium Alloy
Selvakumar, S.
Sreebalaji, V. S.
Ravikumar, K.
MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (07) : 792 - 802
[50] Investigated iterative convergences of neural network for prediction turning tool wear
Wen-Yang Chang
Sheng-Jhih Wu
Jia-Wei Hsu
The International Journal of Advanced Manufacturing Technology, 2020, 106 : 2939 - 2948

← 1 2 3 4 5 →