Detection of accelerated tool wear in turning

被引：19
|
作者：
Bombinski, Sebastian [1 ]
Kossakowska, Joanna [2 ]
Jemielniak, Krzysztof [2 ]
机构：
[1] Kazimierz Pulaski Univ Technol & Humanities Radom, Ul Stasieckiego 54, PL-26600 Radom, Poland
[2] Warsaw Univ Technol, Narbutta 86, PL-02524 Warsaw, Poland
来源：
MECHANICAL SYSTEMS AND SIGNAL PROCESSING | 2022年 / 162卷
关键词：
Turning; Accelerated tool wear detection; Cutting force; Hierarchical time windows; ONLINE; FORCE; MODEL; PREDICTION; MACHINE; NETWORK; SIGNALS;
D O I：
10.1016/j.ymssp.2021.108021
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
There are many algorithms for the identification of gradual tool wear (GTW) which usually counts in minutes and the detection of catastrophic tool failure (CTF) which counts in milliseconds. However, the tool may lose its cutting ability by accelerated tool wear (ATW), which may last several seconds and cannot be sensed either by GTW or CTF detection algorithms. The paper presents an innovative algorithm for early detection of ATW and CTF. It consists in comparing the waveforms of the cutting force sensor signal in hierarchical time windows. The compared waveforms are independent of the absolute value of the signal. This allows the detection of ATWs of different intensity and duration. Tests proved that successful detection of ATW allows for prevention of CTF.
引用
收藏
页数：16
相关论文
共 50 条
  • [21] Estimation of the tool crater wear of the cutting tool with carbide cutting inserts in turning
    Simsive, J. V.
    Kutyshkin, A. V.
    Simsive, D. C.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2012, (01): : 50 - 55
  • [22] Artificial neural network based tool wear estimation on dry hard turning processes of AISI4140 steel using coated carbide tool
    Rajeev, D.
    Dinakaran, D.
    Singh, S. C. E.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2017, 65 (04) : 553 - 559
  • [23] Effect of R410a coolant on tool wear, dimensional deviation and surface roughness in turning of AISI 1045 steel
    Khalaj, Gholamreza
    Haghparast, Mohammad-Javad
    Salari, Mohammad-Sadegh
    Motahari, Alireza
    ENGINEERING RESEARCH EXPRESS, 2024, 6 (03):
  • [24] Prediction of cutting tool wear during a turning process using artificial intelligence techniques
    Marani, Mohsen
    Zeinali, Mohammadjavad
    Kouam, Jules
    Songmene, Victor
    Mechefske, Chris K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (1-2) : 505 - 515
  • [25] Digital Twin-Driven Tool Wear Monitoring and Predicting Method for the Turning Process
    Zhuang, Kejia
    Shi, Zhenchuan
    Sun, Yaobing
    Gao, Zhongmei
    Wang, Lei
    SYMMETRY-BASEL, 2021, 13 (08):
  • [26] ONLINE TOOL WEAR SENSING AND COMPENSATION DURING TURNING OPERATION
    SANJANWALA, A
    CHOUDHURY, SK
    JAIN, VK
    PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1990, 12 (02): : 81 - 84
  • [27] The monitoring of flank wear on the CBN tool in the hard turning process
    J. M. Zhou
    M. Andersson
    J. E. Stahl
    The International Journal of Advanced Manufacturing Technology, 2003, 22 : 697 - 702
  • [28] Tool Wear Mechanism and Theoretical Model of Zirconia Ceramic Turning
    Ma L.-J.
    Zuo Y.-C.
    Wang X.
    Yang D.-F.
    Ma, Lian-Jie (bcmlj1025@163.com), 1600, Northeastern University (41): : 955 - 961
  • [29] The monitoring of flank wear on the CBN tool in the hard turning process
    Zhou, JM
    Andersson, M
    Stahl, JE
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 22 (9-10) : 697 - 702
  • [30] Effect of Si in Workpiece Material on Tool Wear in Hard Turning
    Iwasaki, Tatsuya
    Aiso, Toshiharu
    Watari, Koji
    ISIJ INTERNATIONAL, 2019, 59 (11) : 2062 - 2072
12345