Pulsed laser deposition of Cu2ZnSnS4 thin films from single quaternary sulfide target prepared by combustion method

被引：17
作者：
Jin, Xin [1 ]
Yuan, Chenchen [1 ]
Jiang, Guoshun [1 ]
Liu, Weifeng [1 ]
Zhu, Changfei [1 ]
机构：
[1] Univ Sci & Technol China, Dept Mat Sci & Engn, CAS Key Lab Mat Energy Convers, Hefei 230026, Peoples R China
来源：
MATERIALS LETTERS | 2016年 / 175卷
关键词：
CZTS; PLD; Combustion method; Solar energy materials; Thin films; CZTS ABSORBER; SOLAR-CELLS; LAYER;
D O I：
10.1016/j.matlet.2016.04.046
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, a pulsed laser deposition process using single quaternary sulfide target to fabricate Cu2ZnSnS4 thin films was described. The mixed metal oxides powder prepared by combustion method was further utilized to fabricate quaternary CZTS target by adopting a presulfurization step. In addition, CZTO target directly made from combustion synthesized oxide powder was also fabricated as comparison to study the effects of precursor composition form on the grain growth and absorber/Mo interface properties. The carrier concentration of the annealed Cu2ZnSnS4 film was determined by capacitance voltage measurement. (C) 2016 Published by Elsevier B.V.
引用
收藏
页码：180 / 183
页数：4
相关论文
共 10 条
  • [1] Fabrication of 3.01% power conversion efficient high-quality CZTS thin film solar cells by a green and simple sol-gel technique
    Agawane, G. L.
    Kamble, A. S.
    Vanalakar, S. A.
    Shin, S. W.
    Gang, M. G.
    Yun, Jae Ho
    Gwak, Jihye
    Moholkar, A. V.
    Kim, Jin Hyeok
    [J]. MATERIALS LETTERS, 2015, 158 : 58 - 61
  • [2] Film growth mechanisms in pulsed laser deposition
    Aziz, Michael J.
    [J]. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2008, 93 (03): : 579 - 587
  • [3] Preparation of Cu2ZnSnS4-based thin film solar cells by a combustion method
    Jin, Xin
    Li, Jianmin
    Chen, Guilin
    Xue, Cong
    Liu, Weifeng
    Zhu, Changfei
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2016, 146 : 16 - 24
  • [4] Studies of compositional dependent CZTS thin film solar cells by pulsed laser deposition technique: An attempt to improve the efficiency
    Moholkar, A. V.
    Shinde, S. S.
    Agawane, G. L.
    Jo, S. H.
    Rajpure, K. Y.
    Patil, P. S.
    Bhosale, C. H.
    Kim, J. H.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 544 : 145 - 151
  • [5] Synthesis of Cu2ZnSnS4 (CZTS) absorber by rapid thermal processing (RTP) sulfurization of stacked metallic precursor films for solar cell applications
    Pawar, S. M.
    Inamdar, A. I.
    Pawar, B. S.
    Gurav, K. V.
    Shin, S. W.
    Yanjun, Xiao
    Kolekar, S. S.
    Lee, Jung-Ho
    Kim, Jin Hyeok
    Im, Hyunsik
    [J]. MATERIALS LETTERS, 2014, 118 : 76 - 79
  • [6] Cu2ZnSnS4 (CZTS) nanoparticle based nontoxic and earth-abundant hybrid pn-junction solar cells
    Saha, Sudip K.
    Guchhait, Asim
    Pal, Amlan J.
    [J]. PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2012, 14 (22) : 8090 - 8096
  • [7] Physical aspects of the pulsed laser deposition technique: The stoichiometric transfer of material from target to film
    Schou, J.
    [J]. APPLIED SURFACE SCIENCE, 2009, 255 (10) : 5191 - 5198
  • [8] Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films
    Shin, Seung Wook
    Pawar, S. M.
    Park, Chan Young
    Yun, Jae Ho
    Moon, Jong-Ha
    Kim, Jin Hyeok
    Lee, Jeong Yong
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 (12) : 3202 - 3206
  • [9] Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency
    Wang, Wei
    Winkler, Mark T.
    Gunawan, Oki
    Gokmen, Tayfun
    Todorov, Teodor K.
    Zhu, Yu
    Mitzi, David B.
    [J]. ADVANCED ENERGY MATERIALS, 2014, 4 (07)
  • [10] A non-toxic, solution-processed, earth abundant absorbing layer for thin-film solar cells
    Woo, Kyoohee
    Kim, Youngwoo
    Moon, Jooho
    [J]. ENERGY & ENVIRONMENTAL SCIENCE, 2012, 5 (01) : 5340 - 5345
1