Experimental Study of the Small Lubrication Holes on the Die Shoulder on the Formability in Cylindrical Cup Deep-Drawing

被引：0
|
作者：
Shi, Yuqing [1 ]
机构：
[1] Zhejiang Univ Sci & Technol, Sch Mech & Automot Engn, Hangzhou 310023, Zhejiang, Peoples R China
来源：
ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2 | 2011年 / 37-38卷
关键词：
Small lubrication holes; Die shoulder; Cylindrical cup; Deep drawing; Formability;
D O I：
10.4028/www.scientific.net/AMM.37-38.428
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Wrinkling and tearing are major defects that usually occur in the deep-drawing process. This study presents a new sheet forming technology, together with machining small lubrication holes on the die shoulder. Deep drawing process of cylindrical cups with flange is investigated. Mechanical characteristics of die shoulder with small lubrication holes in deep drawing are analyzed. Numerical simulation and experimental methods are used to determine the influence on formability of machining small lubrication holes on the die shoulder. The results show that this new sheet forming process can improve formability and forming quality.
引用
收藏
页码：428 / 431
页数：4
相关论文
共 22 条
  • [21] Study on deep drawing law of the cylindrical part with prefabricate-holes based on inverse finite element method and forward finite element method
    Tan, Liguang
    Xiao, Xiaoting
    Wen, Huadian
    Chen, Qiaoyu
    PROGRESS IN CIVIL ENGINEERING, PTS 1-4, 2012, 170-173 : 3086 - 3090
  • [22] Experimental and numerical investigation of the deep drawing process using a tractrix die - An industrial case study focused on stress and temperature analysis
    Mandic, V
    Milosavljevic, Dj
    Jurkovic, Z.
    Adamovic, D.
    ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2024, 19 (01): : 133 - 148
123