Partial condensation of R407C and R410A refrigerants inside a plate heat exchanger

被引:28
作者
Mancin, Simone [1 ]
Del Col, Davide [1 ]
Rossetto, Luisa [1 ]
机构
[1] Univ Padua, Dipartimento Fis Tecn, I-35131 Padua, Italy
关键词
Condensation; Plate heat exchanger; Heat transfer; R407C; R410A; PRESSURE-DROP; R-134A;
D O I
10.1016/j.expthermflusci.2011.09.007
中图分类号
O414.1 [热力学];
学科分类号
摘要
This work investigates the condensation heat transfer of two refrigerants mixtures, R407C and R410A, in a brazed plate heat exchanger (BPHE) reporting the experimental measurements of the heat transfer coefficient. The prototype consists of six plates with two refrigerant ducts and three water channels. The condensation heat transfer coefficients of R407C and R410A have been measured at constant inlet saturation pressure of 1.6 MPa and 2.2 MPa, respectively. For both refrigerants, the superheating at the inlet of the heat exchanger was around 15 K; the mass flux has been varied from 15 to 40 kg m(-2) s(-1) whereas the outlet vapour quality has been changed between 0.07 and 0.58 in order to investigate the effect of vapour quality. The experimental measurements have been compared against three models suggested in the open literature; moreover, a new computation procedure for the design of BPHE condensers has been developed and validated against the present experimental database. (C) 2011 Elsevier Inc. All rights reserved.
引用
收藏
页码:149 / 157
页数:9
相关论文
共 22 条
[1]  
Bell K.J., 1972, AICHE SYM SER, V69, P72
[2]   Heat transfer and pressure drop during condensation of refrigerants inside horizontal enhanced tubes [J].
Cavallini, A ;
Del Col, D ;
Doretti, L ;
Longo, GA ;
Rossetto, L .
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2000, 23 (01) :4-25
[3]   Condensation in horizontal smooth tubes: A new heat transfer model for heat exchanger design [J].
Cavallini, Alberto ;
Del Col, Davide ;
Doretti, Luca ;
Matkovic, Marko ;
Rossetto, Luisa ;
Zilio, Claudio ;
Censi, Giuseppe .
HEAT TRANSFER ENGINEERING, 2006, 27 (08) :31-38
[4]   Condensation of zeotropic mixtures in horizontal tubes: New simplified heat transfer model based on flow regimes [J].
Del Col, D ;
Cavallini, A ;
Thome, JR .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2005, 127 (03) :221-230
[5]   Heat transfer coefficient and pressure drop during refrigerant R-134a condensation in a plate heat exchanger [J].
Djordjevic, Emila M. ;
Kabelac, Stephan ;
Serbanovic, Slobodan P. .
CHEMICAL PAPERS, 2008, 62 (01) :78-85
[6]   Generalized correlations for predicting heat transfer and pressure drop in plate heat exchanger channels of arbitrary geometry [J].
Dovic, D. ;
Palm, B. ;
Svaic, S. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (19-20) :4553-4563
[7]   A general review of the Wilson plot method and its modifications to determine convection coefficients in heat exchange devices [J].
Fernandez-Seara, Jose ;
Uhia, Francisco J. ;
Sieres, Jaime ;
Campo, Antonio .
APPLIED THERMAL ENGINEERING, 2007, 27 (17-18) :2745-2757
[8]  
Han DH, 2003, J KOREAN PHYS SOC, V43, P66
[9]   Study of carbon dioxide condensation in chevron plate exchangers; heat transfer analysis [J].
Hayes, N. ;
Jokar, Amir ;
Ayub, Zahid H. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (5-6) :1121-1131
[10]   Condensation heat transfer and pressure drop of brazed plate heat exchangers using refrigerant R-134a [J].
Jokar, A ;
Eckels, SJ ;
Hosni, MH ;
Gielda, TP .
JOURNAL OF ENHANCED HEAT TRANSFER, 2004, 11 (02) :161-182