Improvement of the tribological properties of pure Ti by laser cladding intermetallic compound composite coating

被引:3
作者
Guo, C. [1 ,2 ]
Zhou, J-S [1 ]
Zhao, J-R [1 ,2 ]
Chen, J-M [1 ]
机构
[1] Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China
[2] Chinese Acad Sci, Grad Univ, Beijing, Peoples R China
基金
中国国家自然科学基金;
关键词
titanium; laser cladding; intermetallics; wear mechanism; HIGH-TEMPERATURE SYNTHESIS; WEAR BEHAVIOR; TITANIUM-ALLOYS; SURFACE MODIFICATION; ION-IMPLANTATION; MATRIX COMPOSITE; TI-6AL-4V ALLOY; ABRASIVE WEAR; FRETTING WEAR; PLASMA;
D O I
10.1177/1350650111409665
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Intermetallic compound composite coating was fabricated on pure Ti substrate by laser cladding. The microstructure and tribological properties of the prepared intermetallic compound coating sliding against AISI-52100 steel ball at different normal loads were evaluated. The morphologies of the worn surfaces were analysed by means of scanning electron microscopy and three-dimensional non-contact surface mapping. It is shown that the microhardness and wear resistance of the pure Ti substrate are greatly increased after laser cladding intermetallic compound coating, due to the formation of hard phases in the composite coating. The intermetallic compound composite coating, involving only mild abrasive wear and adhesive wear under lower normal load, and abrasive, adhesive and microfracture under higher normal load, when sliding against the AISI-52100 counterpart.
引用
收藏
页码:864 / 874
页数:11
相关论文
共 50 条
[31]   Effect of Ti addition on microstructure and tribological properties of laser cladding Ni35/WC coating in an oxygen-free environment [J].
Jing, Peiyao ;
Wang, Haijun ;
Chen, Wengang ;
Chen, Long ;
Yin, Hongze ;
Wu, Huajie ;
Li, Dongyang .
SURFACE & COATINGS TECHNOLOGY, 2022, 440
[32]   Microstructure and Tribological Properties of TiCN-containing Composite Coatings Produced on Pure Ti Substrate by Laser Surface Alloying [J].
Guo, C. ;
Zhou, J-S. ;
Zhao, J-R. ;
Yu, Y-J. ;
Zhou, H-D. ;
Chen, J-M. .
LASERS IN ENGINEERING, 2011, 21 (1-2) :63-76
[33]   Microstructure and Tribological Properties of In Situ TiC-Reinforced Ti-Based Composite Coating by Laser Cladding on TC4 Surface Abstract [J].
Zhang Hongwei ;
Zhang Dingli ;
Zhang Tiangang ;
Li Baoxuan ;
Xu Yutong .
LASER & OPTOELECTRONICS PROGRESS, 2021, 58 (01)
[34]   Tribological Properties of Laser Cladding Co-Based Alloy Coating Under Different Loads [J].
Xu Jiale ;
Tan Wensheng ;
Hu Zengrong ;
Wang Songtao ;
Zhou Jianzhong .
LASER & OPTOELECTRONICS PROGRESS, 2022, 59 (07)
[35]   Microstructure and Properties of the Pure Copper Coating Prepared by Blue Laser Cladding [J].
Ning, Chenhong ;
Gao, Shuohong ;
Zheng, Jiangpeng ;
Wang, Xiao ;
Yang, Junhong ;
Su, Yunhai ;
Liu, Min ;
Yan, Xingchen .
Cailiao Daobao/Materials Reports, 2024, 38 (17)
[36]   Microstructure and tribological properties of Stellite 12 coating by laser cladding on 304 stainless steel surface [J].
Rui Wang ;
Changyao Ouyang ;
Yanling Li ;
Chunjiang Zhao ;
Qiaofeng Bai .
Journal of Mechanical Science and Technology, 2023, 37 :3953-3960
[37]   Microstructure and properties of pure titanium coating on Ti-6Al-4V alloy by laser cladding [J].
Wang, Chao ;
Li, Juanjuan ;
Wang, Tao ;
Chai, Linjiang ;
Deng, Chong ;
Wang, Yueyuan ;
Huang, Yun .
SURFACE & COATINGS TECHNOLOGY, 2021, 416
[38]   Investigation on Sliding Tribological Properties of Laser Cladding Alloy Coating for Subway Wheels [J].
Xiao, Qian ;
Zhang, Bo ;
Yang, Wenbin .
COATINGS, 2022, 12 (10)
[39]   Study of the Ti-20 wt. % Mo Composite Coating Prepared by Laser Cladding [J].
Yang, Rongjuan ;
Liu, Zongde ;
Yang, Guang ;
Ren, Weiyu .
IUMRS INTERNATIONAL CONFERENCE IN ASIA 2011, 2012, 36 :355-359
[40]   Effects of Cr content on microstructure and tribological properties of laser cladding Ti-based coatings [J].
Li, Jian ;
Cui, Xiufang ;
Guan, Yajie ;
Jin, Guo ;
Zheng, Wei ;
Su, Wennan ;
Wan, Simin ;
Shi, Zizhong .
TRIBOLOGY INTERNATIONAL, 2023, 187