Study on micro-hardness of electroless composite plating of Ni-P with SiC nano-particles

被引：0

作者：

Sun, Yong ^{[1
,2
]}

Zhang, Zhaoguo ^{[1
]}

Li, Jiamin ^{[3
]}

Xu, Donghui ^{[1
]}

机构：

[1] NE Agr Univ, Harbin 150030, Peoples R China

[2] Heilongijiang Agr Polytech Univ, Jiamusi 154007, Peoples R China

[3] Luoding Polytech Univ, Luoding 527200, Peoples R China

来源：

INTERNATIONAL CONFERENCE ON SMART MATERIALS AND NANOTECHNOLOGY IN ENGINEERING, PTS 1-3 | 2007年 / 6423卷

关键词：

Ni-P alloys; nano-marterials; SiC; electroless composite plating; micro-hardness; ultrasonic;

D O I：

10.1117/12.780124

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

In this paper, a Ni-P electroless composite coating containing nano SiC particles was produced. The wearability of the composite coating was studied. Temperature, PH of the plating liquid and the concentration of SiC nanoparticles in the plating liquid were taken as parameters and the experiment with three factors and five levels was designed through the method of quadratic orthogonal rotation combination. SiC nanoparticles were dispersed by ultrasonic. The influence of the testing parameters on the hardness of the coating was studied intensively. The optimal parameters were obtained when the temperature is 86 +/- 1 degrees C, PH is 6 +/- 0.5 and the concentration of SiC nanoparticles is 6g/L. The maximal hardness of the coating is over 1700HV after heat treatment.

引用

页数：6