Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr-Ti-Ni-Cu-Be bulk metallic glass

被引:143
作者
Launey, M. E. [1 ]
Busch, R. [2 ]
Kruzic, J. J. [1 ]
机构
[1] Oregon State Univ, Sch Mech Ind & Manufactuing Engn, Corvallis, OR 97331 USA
[2] Univ Saarland, Lehrstuhl Met Werkstoffe, D-66041 Saarbrucken, Germany
基金
美国国家科学基金会;
关键词
bulk metallic glasses; free volume; fatigue; fracture; residual stresses;
D O I
10.1016/j.actamat.2007.10.007
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The roles of free volume and residual stress in affecting the fracture and fatigue behavior of a Zr44Ti11Ni10Cu10Be25 bulk metallic glass are examined. Different residual stress and free volume states were achieved by annealing below the glass transition temperature. When residual stresses from casting were relieved by annealing, there was an associated decrease in both the fracture toughness and fatigue threshold. Longer and higher temperature annealing resulted in free volume reduction,; due to structural relaxation that were quantified by enthalpy recovery measurements. Structural relaxation shows a pronounced effect in reducing the fracture toughness and improving the fatigue limit by affecting fatigue crack initiation. However, free volume reduction did not show any influence on the fatigue crack-growth rates or thresholds. This latter effect is attributed to the fact that the large strains at the fatigue crack tip cause a local increase in free volume that appears to dominate the local flow properties, making the initial free volume state irrelevant. The increased free volume associated with this fatigue transformation zone was verified by depth-profiled positron annihilation spectroscopy conducted on the fatigue fracture surfaces. Finally.. controlling free volume and residual stresses appears to be a viable way to tailor the fracture and fatigue properties of bulk metallic glasses for given applications. (c) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:500 / 510
页数:11
相关论文
共 74 条
[21]   Positron annihilation as a method to characterize porous materials [J].
Gidley, David W. ;
Peng, Hua-Gen ;
Vallery, Richard S. .
ANNUAL REVIEW OF MATERIALS RESEARCH, 2006, 36 :49-79
[22]   Fatigue of a Zr-Ti-Cu-Ni-Be bulk amorphous metal: Stress/life and crack-growth behavior [J].
Gilbert, CJ ;
Lippmann, JM ;
Ritchie, RO .
SCRIPTA MATERIALIA, 1998, 38 (04) :537-542
[23]   Mechanisms for fracture and fatigue-crack propagation in a bulk metallic glass [J].
Gilbert, CJ ;
Schroeder, V ;
Ritchie, RO .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (07) :1739-1753
[24]   Fracture toughness and fatigue-crack propagation in a Zr-Ti-Ni-Cu-Be bulk metallic glass [J].
Gilbert, CJ ;
Ritchie, RO ;
Johnson, WL .
APPLIED PHYSICS LETTERS, 1997, 71 (04) :476-478
[25]   Structural relaxation in a bulk metallic glass [J].
Hammond, VH ;
Houtz, MD ;
O'Reilly, JM .
JOURNAL OF NON-CRYSTALLINE SOLIDS, 2003, 325 (1-3) :179-186
[26]   Large supercooled liquid region and phase separation in the Zr-Ti-Ni-Cu-Be bulk metallic glasses [J].
Hays, CC ;
Kim, CP ;
Johnson, WL .
APPLIED PHYSICS LETTERS, 1999, 75 (08) :1089-1091
[27]   Mechanisms of elevated temperature fatigue crack growth in Zr-Ti-Cu-Ni-Be bulk metallic glass [J].
Hess, PA ;
Dauskardt, RH .
ACTA MATERIALIA, 2004, 52 (12) :3525-3533
[28]  
HUFNAGEL TC, 2007, COMMUNICATION
[29]   Mechanical behavior of shear bands and the effect of their relaxation in a rolled amorphous Al-based alloy [J].
Jiang, WH ;
Pinkerton, FE ;
Atzmon, M .
ACTA MATERIALIA, 2005, 53 (12) :3469-3477
[30]   The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5 :: a high-resolution transmission electron microscopy study [J].
Jiang, WH ;
Atzmon, M .
ACTA MATERIALIA, 2003, 51 (14) :4095-4105