Fabrication and nanoindentation characterization of MgAlON transparent ceramics

被引：23

作者：

Ma, Benyuan ^{[1
]}

Zhang, Wei ^{[2
]}

Wang, Yuezhong ^{[3
]}

Song, Haizhi ^{[2
]}

Xie, Xiumin ^{[2
]}

Zhang, Zhibin ^{[2
]}

Yao, Chao ^{[2
]}

Luo, Hui ^{[2
]}

Niu, Ruihua ^{[2
]}

机构：

[1] Nanyang Normal Univ, Coll Phys & Elect Engn, Nanyang 473061, Peoples R China

[2] Southwest Inst Tech Phys, Chengdu 610041, Peoples R China

[3] Tianjin Jinhang Tech Phys Inst, Tianjin Key Lab Opt Thin Films, Tianjin 300192, Peoples R China

来源：

OPTICAL MATERIALS | 2018年 / 84卷

基金：

中国国家自然科学基金;

关键词：

MgAlON; Deformation; Nanoindentation; Hardness; Fracture toughness; SCANNING PROBE MICROSCOPY; BULK METALLIC-GLASS; MECHANICAL-PROPERTIES; CARBOTHERMAL POWDER; BORON-CARBIDE; INDENTATION; TOUGHNESS; HARDNESS; PLASTICITY; CRACKING;

D O I：

10.1016/j.optmat.2018.07.047

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Highly transparent MgAlON ceramics were fabricated by pressureless presintering and hot isostatic pressing. The deformation, hardness and fracture toughness of MgAlON transparent ceramics have been studied by nanoindentation technique. The indentation tests were performed with applied loads of 2-400 mN to investigate the variation in mechanical behaviors. It was found that the plastic deformation component dominated MgAlON ceramics at the applied loads from 2 mN to 200 mN. The resistance to plastic deformation decreased when the applied load increased. However, the micro-cracks induced by nanoindentation have been observed at the load above 200 mN. In addition, the true hardness (similar to 13.5 GPa) was determined based on the proportional sample resistance (PSR). Furthermore, the fracture toughness (2.2-2.7 MPa m(1/2)) was evaluated using Laugier's equation. This study lends credible the realization of mechanical properties of the MgAlON transparent ceramics in the design and practical applications.

引用

页码：714 / 721

页数：8

共 35 条

[21] Nanoindentation hardness of submicrometer alumina ceramics
Krell, A
Schädlich, S
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 307 (1-2): : 172 - 181
[22] Toughness evaluation of HVOFWC-Co coatings using non-linear regression analysis
Lima, MM
Godoy, C
Avelar-Batista, JC
Modenesi, PJ
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 357 (1-2): : 337 - 345
[23] Highly Transparent Mg0.27Al2.58O3.73N0.27 Ceramic Prepared by Pressureless Sintering
Liu, Xiao
Wang, Hao
Tu, Bingtian
Wang, Weimin
Fu, Zhengyi
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2014, 97 (01) : 63 - 66
[24] Novel divalent europium doped MgAlON transparent ceramic for shortwave ultraviolet erasable windows
Liu, Xin
Wang, Hao
Tu, Bingtian
Wang, Weimin
Fu, Zhengyi
[J]. SCRIPTA MATERIALIA, 2015, 105 : 30 - 33
[25] Transition between interface defeat and penetration for tungsten projectiles and four silicon carbide materials
Lundberg, P
Lundberg, B
[J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2005, 31 (07) : 781 - 792
[26] Pressureless sintering and fabrication of highly transparent MgAlON ceramic from the carbothermal powder
Ma, Benyuan
Wang, Yuezhong
Zhang, Wei
Chen, Qingyun
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 745 : 617 - 623
[27] Hot isostatic pressing of MgAlON transparent ceramic from carbothermal powder
Ma, Benyuan
Zhang, Wei
Wang, Yuezhong
Xie, Xiumin
Song, Haizhi
Yao, Chao
Zhang, Zhibin
Xu, Qiang
[J]. CERAMICS INTERNATIONAL, 2018, 44 (04) : 4512 - 4515
[28] Initiation of shear bands near a stress concentration in metallic glass
Packard, C. E.
Schuh, C. A.
[J]. ACTA MATERIALIA, 2007, 55 (16) : 5348 - 5358
[29] On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data
Peng, ZJ
Gong, JH
Miao, HZ
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (08) : 2193 - 2201
[30] Elastoplastic load-depth hysteresis in pyramidal indentation
Sakai, M
Nakano, Y
[J]. JOURNAL OF MATERIALS RESEARCH, 2002, 17 (08) : 2161 - 2173

← 1 2 3 4 →