Slurry abrasive wear, microstructural and morphological analysis of titanium carbide and zirconium sand aluminium alloy (A5052) metal matrix composite

This study of dual reinforcement particles with combination of numerous weight ratios of reinforcement on micro-structural topographies and slurry abrasive wear behaviour of A5052 alloy. Titanium carbide and zircon sand particles size between 10-25 mu m are reinforced in the alloy respectively, by two-step stir casting method. Slurry abrasive wear study reveals enhancement for twin particle reinforcement of the abrasive wear resistance ratio (1:1) as compared to others (1:2, 2:1) weight percentage of twin particle reinforcement if mixed in a stoichiometric proportion. The wear behaviour was examined by the sample rotation technique using slurry abrasive tester. The effects of speed, slurry media and sand concentration on the slurry wear behaviour have been investigated. To observe the influence of both TiC and ZrSiO4 particles dispersion matrix alloy was also characterized under similar conditions. Analysis suggests the addition of both TiC and ZrSiO4 significantly improves the wear resistance of as-synthesized matrix alloy in marine industry and mine environments. However, slurry environment and speed consists to the combined effect on wear rate. The analysis also indicate the specific combination of reinforcement (15 %) with zircon sand and titanium carbide particles in the composite A exhibits healthier abrasive wear resistance as compared to other combinations. (C) 2018 Elsevier Ltd. All rights reserved.