On low-cycle fatigue of austenitic steel. Part I: Changes of Poisson's ratio and elastic anisotropy

被引:13
作者
Mishakin, V. V. [1 ]
Gonchar, A. V. [1 ]
Kurashkin, K. V. [1 ]
Klyushnikov, V. A. [1 ]
Kachanov, M. [2 ]
机构
[1] RAS, Inst Appl Phys, Fed Res Ctr, Mech Engn Res Inst,RAS Branch, 85 Belinskogo Str, Nizhnii Novgorod 603024, Russia
[2] Tufts Univ, Dept Mech Engn, Medford, MA 02155 USA
基金
俄罗斯科学基金会;
关键词
Fatigue; Austenitic steel; Monitoring; Martensite; Anisotropy; Poisson's ratio; STAINLESS-STEEL; MARTENSITIC-TRANSFORMATION; ACOUSTIC-EMISSION; DEFORMATION; TEMPERATURE; 304L;
D O I
10.1016/j.ijengsci.2021.103567
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Microstructural changes under low-cycle fatigue of a metastable austenitic steel are monitored by a combination of the acoustic parameters: Poisson's ratio (more precisely, its change) as indicator of the "diffused" damage and anisotropy change as indicator of changes of texture. Three stages of the Poisson's ratio evolution are identified; they serve as markers of the process of material degradation. A criterion of fracture in terms of a critical combination of the changes of the mentioned parameters is proposed and tested. The challenge of separating the effects of damage accumulation and of the martensitic transformation on elasticity parameters is addressed by combining acoustic monitoring with the eddy current data.
引用
收藏
页数:9
相关论文
共 29 条
[1]   THE MEASUREMENT OF RESIDUAL-STRESS IN TEXTURED STEEL USING AN ULTRASONIC VELOCITY COMBINATIONS TECHNIQUE [J].
ALLEN, DR ;
SAYERS, CM .
ULTRASONICS, 1984, 22 (04) :179-188
[2]   Characterization of fatigue damage in 304L steel by an acoustic emission method [J].
Amer, A. Ould ;
Gloanec, A-L. ;
Courtin, S. ;
Touze, C. .
FATIGUE DESIGN 2013, INTERNATIONAL CONFERENCE PROCEEDINGS, 2013, 66 :651-660
[3]  
Bunge H.-. J., 1982, TEXTURE ANAL MAT SCI, P188, DOI [10.1016/B978-0-408-10642-9.50013-1, DOI 10.1016/B978-0-408-10642-9.50013-1]
[4]  
Ellyin F., 1996, Fatigue Damage, Crack Growth and Life Prediction, DOI [10.1007/978-94-009-1509-1, DOI 10.1007/978-94-009-1509-1]
[5]   STACKING-FAULTS AND FCC (GAMMA)-]HCP (EPSILON) TRANSFORMATION IN 18-8-TYPE STAINLESS-STEEL [J].
FUJITA, H ;
UEDA, S .
ACTA METALLURGICA, 1972, 20 (05) :759-+
[6]   APPLICATION OF DISLOCATION THEORY TO INTERNAL FRICTION PHENOMENA AT HIGH FREQUENCIES [J].
GRANATO, A ;
LUCKE, K .
JOURNAL OF APPLIED PHYSICS, 1956, 27 (07) :789-805
[7]   THE ELASTIC BEHAVIOUR OF A CRYSTALLINE AGGREGATE [J].
HILL, R .
PROCEEDINGS OF THE PHYSICAL SOCIETY OF LONDON SECTION A, 1952, 65 (389) :349-355
[9]  
Kachanov L, 1994, IZV ACAD NAUK SSS, V8, P3
[10]  
Kachanov M, 2018, SOLID MECH APPL, V249, P1, DOI 10.1007/978-3-319-76204-3