Fracture behavior of polyurethane foams

被引：0
|
作者：
Jin, Helena [1 ]
Lu, Wei-Yang [1 ]
Hong, Soonsung [1 ]
Connelly, Kevin [1 ]
Korellis, John [1 ]
机构：
[1] Sandia Natl Labs, Mech Mat Dept, Livermore, CA 94550 USA
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 10, PTS A AND B: MECHANICS OF SOLIDS AND STRUCTURES | 2008年
关键词：
polyurethane (PU) foam; SENB; SENT; DIC;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Due to their high energy absorption capabilities, polyurethane (PU) foams have been widely used in many applications. The mechanical behavior of Polyurethane (PU) foams has been attracting the attention from engineers and researchers. But most of work was to study the compressive behavior of PU foams. Very little knowledge is available about the fracture behavior of the PU foams. In this paper, single edge notch bend (SENB) and single edge notch tension (SENT) tests are conducted to study the mode-I fracture behavior of a rigid closed cell PU foam, PMDI 20, with a nominal density of 20 pcf (320 kg/m(3)). The stress intensity factor K-IC is calculated from the loading curves. The displacement and strain field around the crack tip is obtained using digital image correlation (DIC) technique.
引用
收藏
页码：951 / 954
页数：4
相关论文
共 50 条
  • [41] Fracture behaviour of thermosetting polymers for ophthalmic lenses
    Martinez, A. B.
    Artus, P.
    Duersteter, J. C.
    Arencon, D.
    ENGINEERING FAILURE ANALYSIS, 2010, 17 (01) : 4 - 10
  • [42] Brittle fracture of notched components fabricated by stereolithography
    Khosravani, Mohammad Reza
    Frohn-Soerensen, Peter
    Schwarzkopf, Andreas
    Engel, Bernd
    Reinicke, Tamara
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 8071 - 8078
  • [43] Observation of cracking and measurement of fracture toughness in graphite
    C. Liu
    C. M. Cady
    International Journal of Fracture, 2021, 232 : 55 - 75
  • [44] Effect of non-associated flow rule on fracture prediction of metal sheets using a novel anisotropic ductile fracture criterion
    Quach, Hung
    Kim, Young-Suk
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, 195
  • [45] Application of Digital Image Correlation to reinforced concrete fracture
    Fayyad, Tahreer M.
    Lees, Janet M.
    20TH EUROPEAN CONFERENCE ON FRACTURE, 2014, 3 : 1585 - 1590
  • [46] Effect of loading rate on fracture mechanics of NiTi SMA
    Fatma Mutlu
    Günay Anlaş
    Ziad Moumni
    International Journal of Fracture, 2020, 224 : 151 - 165
  • [47] Effect of loading rate on fracture mechanics of NiTi SMA
    Mutlu, Fatma
    Anlas, Gunay
    Moumni, Ziad
    INTERNATIONAL JOURNAL OF FRACTURE, 2020, 224 (02) : 151 - 165
  • [48] DETERMINATION OF MODE I FRACTURE PROPERTIES OF EUROPEAN SPRUCE
    Todorovic, Marija
    Koetsier, Mathieu
    Simovic, Nada
    Glisovic, Ivan
    Pavlovic, Marko
    WOOD RESEARCH, 2023, 68 (02) : 334 - 347
  • [49] Dynamic Fracture Characteristics of Cyanoacrylate Weakened Planes in Polycarbonate Material
    Messer, Kyle R.
    Guthai, Achyuth Thumbalam
    Fahem, Ali F.
    Singh, Raman P.
    DYNAMIC BEHAVIOR OF MATERIALS, VOL 1, 2023, 2024, : 73 - 78
  • [50] Dynamic fracture analysis of sandstone specimens containing different inclusions
    Han, Zhenyu
    Xie, Shijie
    Li, Diyuan
    Feng, Fan
    Yuan, Wei
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 122
12345