Fracture behavior of polyurethane foams

被引：0
|
作者：
Jin, Helena [1 ]
Lu, Wei-Yang [1 ]
Hong, Soonsung [1 ]
Connelly, Kevin [1 ]
Korellis, John [1 ]
机构：
[1] Sandia Natl Labs, Mech Mat Dept, Livermore, CA 94550 USA
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 10, PTS A AND B: MECHANICS OF SOLIDS AND STRUCTURES | 2008年
关键词：
polyurethane (PU) foam; SENB; SENT; DIC;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Due to their high energy absorption capabilities, polyurethane (PU) foams have been widely used in many applications. The mechanical behavior of Polyurethane (PU) foams has been attracting the attention from engineers and researchers. But most of work was to study the compressive behavior of PU foams. Very little knowledge is available about the fracture behavior of the PU foams. In this paper, single edge notch bend (SENB) and single edge notch tension (SENT) tests are conducted to study the mode-I fracture behavior of a rigid closed cell PU foam, PMDI 20, with a nominal density of 20 pcf (320 kg/m(3)). The stress intensity factor K-IC is calculated from the loading curves. The displacement and strain field around the crack tip is obtained using digital image correlation (DIC) technique.
引用
收藏
页码：951 / 954
页数：4
相关论文
共 50 条
  • [21] Experimental study of the mechanical and fracture behavior of flawed sandstone subjected to coupled static-repetitive impact loading
    Zhou, Tao
    Han, Zhenyu
    Li, Diyuan
    Chen, Jiarong
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 117
  • [22] Fracture behavior and microcracking mechanism of epoxy resin-grouted fractured granite under different loading conditions
    Hu, Qingbo
    Chen, Guoqing
    Xu, Qiang
    Liu, Guiquan
    Li, Shuang
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 449
  • [23] Experimental investigation on mode I fracture behavior of sandstone after grouting filling under three-point bending
    Wang, Wenbo
    Su, Haijian
    Zhao, Honghui
    Yu, Liyuan
    Wu, Chen
    ENGINEERING FRACTURE MECHANICS, 2023, 291
  • [24] Experimental Investigation of Mechanical and Fracture Behavior of Parallel Double Flawed Granite Material under Impact with Digital Image Correlation
    Zhang, Lei
    Zhang, Zhijun
    Chen, Ying
    Liu, Yong
    Luo, Xinyao
    Dai, Bing
    MATERIALS, 2023, 16 (06)
  • [25] Fracture behavior of double edge notch AlSi10Mg alloy fabricated by laser powder bed fusion
    Khosravani, Mohammad Reza
    Frohn-Soerensen, Peter
    Engel, Bernd
    Reinicke, Tamara
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 130
  • [26] Methods to Determine Low-Constraint Fracture Toughness: Review and Progress
    Zhu, Xian-Kui
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6B, 2017,
  • [27] Evaluation of fracture mechanics parameters for a range of weldment geometries with different mismatch ratios
    Zhou, Haoliang
    Biglari, Farid
    Davies, Catrin M.
    Mehmanparast, Ali
    Nikbin, Kamran M.
    ENGINEERING FRACTURE MECHANICS, 2014, 124 : 30 - 51
  • [28] Application of constraint corrected J-R curves to fracture analysis of pipelines
    Zhu, Xian-Kui
    Leis, Brian N.
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2006, 128 (04): : 581 - 589
  • [29] Bending modified J-Q theory and its application to fracture constraint analysis
    Zhu, Xian-Kui
    Leis, Brian N.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 6: MATERIALS AND FABRICATION, 2007, : 41 - 50
  • [30] Experimental determination of mechanical properties of aluminium foams using Digital Image Correlation
    Voiconi, Tudor
    Linul, Emanoil
    Marsavina, Liviu
    Kovacik, Jaroslav
    Knec, Marcin
    PROCEEDINGS OF THE 14TH SYMPOSIUM ON EXPERIMENTAL STRESS ANALYSIS AND MATERIALS TESTING, 2014, 601 : 254 - +
12345