Fracture behavior of polyurethane foams

被引：0
|
作者：
Jin, Helena [1 ]
Lu, Wei-Yang [1 ]
Hong, Soonsung [1 ]
Connelly, Kevin [1 ]
Korellis, John [1 ]
机构：
[1] Sandia Natl Labs, Mech Mat Dept, Livermore, CA 94550 USA
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 10, PTS A AND B: MECHANICS OF SOLIDS AND STRUCTURES | 2008年
关键词：
polyurethane (PU) foam; SENB; SENT; DIC;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Due to their high energy absorption capabilities, polyurethane (PU) foams have been widely used in many applications. The mechanical behavior of Polyurethane (PU) foams has been attracting the attention from engineers and researchers. But most of work was to study the compressive behavior of PU foams. Very little knowledge is available about the fracture behavior of the PU foams. In this paper, single edge notch bend (SENB) and single edge notch tension (SENT) tests are conducted to study the mode-I fracture behavior of a rigid closed cell PU foam, PMDI 20, with a nominal density of 20 pcf (320 kg/m(3)). The stress intensity factor K-IC is calculated from the loading curves. The displacement and strain field around the crack tip is obtained using digital image correlation (DIC) technique.
引用
收藏
页码：951 / 954
页数：4
相关论文
共 50 条
  • [1] Deformation behavior of open-cell stainless steel foams
    Kaya, A. C.
    Fleck, C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 615 : 447 - 456
  • [2] TESTING OF HYBRID NICKEL-POLYURETHANE FOAMS AT HIGH STRAIN-RATES USING HOPKINSON BAR AND DIGITAL IMAGE CORRELATION
    Adorna, Marcel
    Zlamal, Petr
    Fila, Tomas
    Falta, Jan
    Felten, Markus
    Fries, Michael
    Jung, Anne
    16TH YOUTH SYMPOSIUM ON EXPERIMENTAL SOLID MECHANICS, 2018, 18 : 72 - 76
  • [3] Experimental and Analytical Investigation of the Shear Fracture Behavior of Bonded Joints
    Perrella, Michele
    Berardi, Valentino Paolo
    Armentani, Enrico
    MACROMOLECULAR SYMPOSIA, 2021, 396 (01)
  • [4] Characterization of Elastic-Plastic Fracture Behavior in Thin Sheet Aluminum
    Dawicke, D. S.
    Raju, I. S.
    INTERNATIONAL DIGITAL IMAGING CORRELATION SOCIETY, 2017, : 219 - 221
  • [5] Study on Numerical Simulation Method of Fracture Behavior of Pipeline Girth Weld
    Feng, Qingshan
    Chang, Qun
    Jia, Haidong
    Wu, Yi
    Dai, Lianshuang
    Cao, Yuguang
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2023, 145 (04):
  • [6] Heating-path dependency of fracture behavior of sandstone subjected to thermal treatment
    Jiang, Yu
    Su, Haijian
    Zhang, Luqing
    Yu, Liyuan
    Chen, Guofei
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2023, 127
  • [7] Dynamic progressive fracture behavior of axially confined sandstone specimens containing a single flaw
    Han, Zhenyu
    Li, Diyuan
    Zhou, Tao
    Chen, Jiarong
    Xie, Shijie
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 122
  • [8] Fracture Behavior of Heavily Cross-Linked Epoxy: Testing, Fractography, and Numerical Modeling
    Elruby, A. Y.
    Handrigan, Stephen M.
    Nakhla, Sam
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2021, 143 (01):
  • [9] Laser Repair With Addition of Nano-WC on Microstructure and Fracture Behavior of 304 Stainless Steel
    Jiang, Wei
    Jiang, Xianfeng
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2017, 139 (04):
  • [10] Effects of axial pre-force and loading rate on Mode I fracture behavior of granite
    Han, Zhenyu
    Li, Diyuan
    Li, Xibing
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2022, 157
12345