Microstructure and strength correlation of pure Al and Al-Mg syntactic foam composites subject to uniaxial compression

被引:34
|
作者
Lin, Yingfei [1 ]
Zhang, Qiang [1 ]
Zhang, Fuyang [1 ]
Chang, Jing [1 ]
Wu, Gaohui [1 ]
机构
[1] Harbin Inst Technol, Sch Mat Sci & Engn, POB 433, Harbin 150001, Heilongjiang, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2017年 / 696卷
关键词
Metal matrix composites; Foams; Interface reaction; Strength; Modeling; CELL ALUMINUM FOAMS; MECHANICAL-BEHAVIOR; STRAIN-RATE; FAILURE; FRACTURE; DENSITY;
D O I
10.1016/j.msea.2017.04.060
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The microstructure and quasi-static compression of glass cenospheres/aluminum matrix syntactic foams (AMSFs) with three t/R ratio cenospheres (t/R= 0.043, 0.052 and 0.064) and three different matrices (cp-Al, 5A03 and 5A06) were investigated. The compression strength and energy absorption of foams were found to increase with t/R ratio and Mg in matrix. The strengthening mechanisms were attributed to the nature properties of cenospheres and the thickness of high strength interfacial reaction MgA1204 forming. Two models were provided to predict the quasi-static properties of AMSFs considering the factors including physical properties of matrix and cenospheres, volume fraction of cenospheres, composition changing of matrix and thickness of interfacial reaction coating caused by interfacial reaction between matrix and cenopsheres. The predictions for peak stress, plateau stress, energy absorption capacity and specific energy absorption of AMSFs showed good agreement with experimental data. The Al-Mg syntactic foams in this study exhibited high specific energy absorption (56 J g(-1)) and specific plateau strength (94 MPa cm(-3) g(-1)).
引用
收藏
页码:236 / 247
页数:12
相关论文
共 50 条
  • [31] Stability and response to rolling of the interfaces in cast Al-SiCp and Al-Mg alloy-SiCp composites
    Mitra, R
    Rao, VSC
    Maiti, R
    Chakraborty, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 379 (1-2): : 391 - 400
  • [32] Tensile properties and microstructure of a cryomilled nanograined Al-Mg alloy near the AA5083 composition
    Kaisar, K. H.
    Hofmeister, C.
    Pedigo, A.
    Giri, A. K.
    Sohn, Y.
    Cho, K. C.
    van den Bergh, M.
    Majumdar, B. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 705 : 239 - 248
  • [33] Microstructure and mechanical properties of laser beam welded Al-Li alloy 2060 with Al-Mg filler wire
    Zhang, Xinyi
    Yang, Wuxiong
    Xiao, Rongshi
    MATERIALS & DESIGN, 2015, 88 : 446 - 450
  • [34] Effect of Sc and Zn Additions on Microstructure and Hot Formability of Al-Mg Sheet Alloys
    Zhu, Hanliang
    Dahle, Arne K.
    Ghosh, Amit K.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (03): : 598 - 608
  • [35] Effects of Degassing on the Microstructure, Chemistry, and Estimated Mechanical Properties of a Cryomilled Al-Mg Alloy
    Hofmeister, Clara
    Zhou, Le
    Kellogg, Frank
    Giri, Anit
    Cho, Kyu
    Sohn, Yongho
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (07): : 3066 - 3079
  • [36] Experimental Investigation of Microstructure and Mechanical Properties on Ultrasonic Welded Al-Mg Alloy Sheets
    Selvaraj, Sathishkumar
    Srirangarajalu, N.
    Kengachalam, Naveenkumar
    Pranaybabu, K.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (04) : 975 - 985
  • [37] Effect of current Mg concentration on interfacial reactions during remelting of Al-Mg(5083)/Al2O3p composites
    Zhong, WM
    L'Esperance, G
    Suéry, M
    MATERIALS CHARACTERIZATION, 2002, 49 (02) : 113 - 119
  • [38] Underwater laser texturing for enhanced adhesive joint bonding strength of Al-Mg alloy
    Kumar, Nitish
    Kumar, Subrata
    Prakash, Shashi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2023, 237 (10) : 1461 - 1472
  • [39] Al-Mg alloy engineered with bimodal grain size for high strength and increased ductility
    Witkin, D
    Lee, Z
    Rodriguez, R
    Nutt, S
    Lavernia, E
    SCRIPTA MATERIALIA, 2003, 49 (04) : 297 - 302
  • [40] Effects of Rolling Deformation on Microstructure, Tensile Properties and Corrosion Behaviors of High Mg Alloyed of Al-Mg Alloy
    Ding, Tian
    Yan, Hongge
    Chen, Jihua
    Xia, Weijun
    Su, Bin
    Zhu, Huaming
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (03) : 2168 - 2181