Computation of degradation factors of p-y curves in liquefiable soils for analysis of piles using three-dimensional finite-element model

This paper presents a procedure to compute the values of degradation factors of p-y curves in the pseudo-static analysis of piles in liquefiable soils. Three-dimensional finite-element model was used for the computation of p and y values using OpenSees computer package. The piles were modeled using beam-column elements and elastic section. The soil continuum was modeled using brick elements and a two-surface plasticity model. By comparing the results of models in two cases of liquefiable and non liquefiable, values of degradation factors were obtained. Validation of the degradation factors computed was conducted through the centrifuge test results. The simulation results showed a similar trend between degradation factor variation in different densities and sands. With increasing depth, the degradation factor increased. By comparing the results of pseudo-static analysis with the centrifuge test results, it was concluded that the use of the p-y curves with computed degradation factors in liquefiable sand gave reasonable results. (C) 2016 Elsevier Ltd. All rights reserved.