Influence of surface roughness on the tribological properties of HF-CVD diamond coated heat-treatable steel

被引:3
作者
Kellermann, K. [1 ]
Ehrhardt, S. [1 ]
Fandrey, J. [1 ]
Rosiwal, S. M. [1 ]
Singer, R. F. [1 ]
机构
[1] Univ Erlangen Nurnberg, Inst Sci & Technol Met WTM, D-91058 Erlangen, Germany
关键词
HF CVD diamond; Steel; Surface roughness; Wear; Evenness;
D O I
10.1016/j.wear.2010.08.009
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Standard heat-treatable C35 (1 0501) steel specimens were pre-coated with diffusion chromium carbide interlayer and in second step a crystalline diamond film was applied by Hot-Filament Chemical Vapour Deposition This study investigates the tribological properties of specimens that were treated mechanically in a different way before the coating in order to achieve a different roughness The tests were performed in a water lubricated ring-on-disc configuration while the coefficient of friction was measured Wear analysis was done by light microscope The wear development was obtained by several stops during testing The friction and wear developments are compared and discussed for different surface roughness Pre-treatment of the steel surface has a great influence on the tribological properties of the CVD diamond coating especially the evenness of the surface determines the real contact area and therefore the wear behavior (C) 2010 Elsevier B V All rights reserved
引用
收藏
页码:811 / 815
页数:5
相关论文
共 11 条
[1]   QUANTITATIVE MEASUREMENT OF RESIDUAL BIAXIAL STRESS BY RAMAN-SPECTROSCOPY IN DIAMOND GROWN ON A TI ALLOY BY CHEMICAL-VAPOR-DEPOSITION [J].
AGER, JW ;
DRORY, MD .
PHYSICAL REVIEW B, 1993, 48 (04) :2601-2607
[2]   Diamond coating of steel at high temperatures in hot filament chemical vapour deposition (HFCVD) employing chromium interlayers [J].
Bareiss, C. ;
Perle, M. ;
Rosiwal, S. M. ;
Singer, R. F. .
DIAMOND AND RELATED MATERIALS, 2006, 15 (4-8) :754-760
[3]   CVD diamond coating of steel on a CVD-TiBN interlayer [J].
Bareiss, J. C. ;
Hackl, G. ;
Popovska, N. ;
Rosiwal, S. M. ;
Singer, R. F. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4) :718-723
[4]  
KELLERMANN K, 2009, FRICTION WEAR WEAR P, P247
[5]   Well adherent diamond coatings on steel substrates [J].
Kellermann, Karsten ;
Bareiss, Christian ;
Rosiwal, Stefan M. ;
Singer, Robert F. .
ADVANCED ENGINEERING MATERIALS, 2008, 10 (07) :657-660
[6]  
PERLE M, 2008, THESIS U ERLANGEN NU
[7]  
RUFFER M, 2006, IND ANZ, V5, P24
[8]   THE FRICTION OF DIAMOND SLIDING ON DIAMOND [J].
SAMUELS, B ;
WILKS, J .
JOURNAL OF MATERIALS SCIENCE, 1988, 23 (08) :2846-2864
[9]   High temperature diffusion chromizing as a successful method for CVD-diamond coating of steel - Part II [J].
Schwarz, S ;
Rosiwal, SM ;
Musayev, Y ;
Singer, RE .
DIAMOND AND RELATED MATERIALS, 2003, 12 (3-7) :701-706
[10]   High temperature diffusion chromizing as a successful method for CVD-diamond coating of steel [J].
Schwarz, S ;
Musayev, Y ;
Rosiwal, SM ;
Schaufler, C ;
Singer, RF ;
Meerkamm, H .
DIAMOND AND RELATED MATERIALS, 2002, 11 (3-6) :757-762