A study of surface roughness variation in ultrasonic vibration-assisted milling

被引:82
作者
Shen, Xue-Hui [2 ]
Zhang, Jianhua [1 ]
Xing, Dongliang Xing [1 ]
Zhao, Yunfeng [1 ]
机构
[1] Shandong Univ, Dept Mech Engn, Jinan 250061, Peoples R China
[2] Shandong Polytech Univ, Dept Mech Engn, Jinan 250353, Peoples R China
关键词
Vibration cutting; End milling; Ultrasonic vibration; Surface roughness; METAL;
D O I
10.1007/s00170-011-3399-y
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The objective of this paper is to investigate the effects of assisted ultrasonic vibration on the surface roughness of machined surfaces in micro-end-milling. Series of slot-milling experiments were conducted with aluminum alloy as workpiece material. The surface roughness of slot bottom surface and vertical side wall surface of slot was studied, respectively. It is found that surface roughness of the machined slot bottom surface could increase to varying degrees because of ultrasonic vibration in most of the studied cases, and this deterioration becomes more apparent when large feed per tooth and low-spindle speed were adopted. As for the vertical side wall surface of the slot, there is an obvious improvement of surface roughness when ultrasonic vibration is applied. Based on analysis of variance analysis, further study indicates that the surface roughness of vertical side wall surface of the slot is determined by several key parameters including spindle speed, feed per tooth and amplitude in ultrasonic vibration-assisted milling. An optimal combination of these parameters is of great benefit to achieving small surface roughness.
引用
收藏
页码:553 / 561
页数:9
相关论文
共 16 条
[1]  
[Anonymous], 1999, ANN CIRP
[2]   Using two-dimensional vibration cutting for micro-milling [J].
Chern, GL ;
Chang, YC .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (06) :659-666
[3]   Ultraprecision diamond turning of glass with ultrasonic vibration [J].
Gan, J ;
Wang, X ;
Zhou, M ;
Ngoi, B ;
Zhong, Z .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 21 (12) :952-955
[4]   Development of a practical ultrasonic vibration cutting tool system [J].
Jin, M ;
Murakawa, M .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) :342-347
[5]  
KUMABE J, 1971, J JAPAN SOC PREC ENG, V37, P98
[6]  
KUMABE J, 1985, FUNDAMENTALS APPL VI
[7]   Study of ductile mode cutting in grooving of tungsten carbide with and without ultrasonic vibration assistance [J].
Liu, K ;
Li, XP ;
Rahman, M ;
Liu, XD .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 24 (5-6) :389-394
[8]   Study of machining accuracy in ultrasonic elliptical vibration cutting [J].
Ma, CX ;
Shamoto, E ;
Moriwaki, T ;
Wang, LJ .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (12-13) :1305-1310
[9]   Effect of machining parameters in ultrasonic vibration cutting [J].
Nath, Chandra ;
Rahman, M. .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (09) :965-974
[10]   Analysis of ultrasonic-assisted drilling of Ti6Al4V [J].
Pujana, J. ;
Rivero, A. ;
Celaya, A. ;
Lopez de Lacalle, L. N. .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (06) :500-508