Performance improvement of direct internal reforming solid oxide fuel cell fuelled by H2S-contaminated biogas with paper-structured catalyst technology

被引:34
|
作者
Shiratori, Y. [1 ,2 ]
Sakamoto, M. [2 ]
机构
[1] Kyushu Univ, Fac Engn, Nishi Ku, Motooka 744, Fukuoka 8190395, Japan
[2] Kyushu Univ, Int Res Ctr Hydrogen Energy, Nishi Ku, Motooka 744, Fukuoka 8190395, Japan
关键词
SOFC; Direct internal reforming; Biogas; H2S poisoning; Paper-structured catalyst; Mg/Al-hydrotalcite; NI-BASED ANODES; SIMULATED BIOGAS; CARBON FORMATION; PLANAR SOFC; METHANE; INTERMEDIATE; OPERATION; MODEL; DEACTIVATION; DURABILITY;
D O I
10.1016/j.jpowsour.2016.09.095
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Direct internal reforming (DIR) operation of a solid oxide fuel cell (SOFC) is a very attractive concept for downsizing and cost reduction of SOFC systems. This study aimed to develop stable operation of a DIR-SOFC fuelled by biogas. The current-voltage (I-V) curves of 2 x 2 cm(2) planar SOFCs (anode- and electrolyte-supported cells, ASC and ESC, respectively.) were measured at 800 degrees C in the direct feed of a simulated biogas mixture (CH4/CO2 = 1), and the flexible structured catalyst material (paper-structured catalyst (PSC)) was applied on the anode material for performance enhancement. By applying a hydrotalcite (HT)-dispersed PSC (HT-PSC), the sulfur tolerance of the SOFC in the DIR operation was remarkably improved. By the effect of the HT-PSC, for both ASC and ESC, a stable cell voltage higher than 800 mV was obtained over 200 h at 0.2 A cm(-2) in the direct feed of simulated biogas under 5 ppm H2S poisoning. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码:170 / 179
页数:10
相关论文
共 33 条
  • [31] Tolerance tests of co-feeding Cl2 and H2S impurities in biogas on a Ni-YSZ anode-supported solid oxide fuel cell
    Xu, Chunchuan
    Zondlo, John W.
    Gong, Mingyang
    Liu, Xingbo
    Celik, I. B.
    PROCEEDINGS OF THE ASME 8TH INTERNATIONAL CONFERENCE ON FUEL CELL SCIENCE, ENGINEERING, AND TECHNOLOGY 2010, VOL 1, 2010, : 233 - 241
  • [32] Adaptation of Ni 0.6 Cu 0.4 / Ce 0.9 Gd 0.1 O 1.95 cermet anodes for intermediate temperature solid oxide fuel cells to actual biogas fuel containing trace amounts of H 2 S: E ff ects of catalyst amount and fuel supply rate
    Suzuki, Ryouma
    Sakai, Taisei
    Nishimoto, Shunsuke
    Miyake, Michihiro
    Kameshima, Yoshikazu
    Yonezawa, Tamano
    Shiraishi, Makoto
    Nagai, Anna
    Matsuda, Motohide
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2024, 132 (06) : 280 - 285
  • [33] Electricity production from lignocellulosic biomass by direct coupling of a gasifier and a nickel/yttria-stabilized zirconia-based solid oxide fuel cell: influence of the H2S content of the syngas onto performances and aging
    Ricoul, F.
    Subrenat, A.
    Joubert, O.
    La Salle, A. Le Gal
    JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2018, 22 (09) : 2789 - 2800