Evaluation of stress intensity factor for a partially patched crack using an approximate weight function

被引：2
|
作者：
Kim, JH
Hong, SG
Lee, SB
机构：
[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Taejon 305701, South Korea
[2] KRISS, Force Measurement & Evaluat Lab, Taejon 305701, South Korea
来源：
KSME INTERNATIONAL JOURNAL | 2003年 / 17卷 / 11期
关键词：
crack-bridging model; stress intensity factor; weight function; patched crack; notch;
D O I：
10.1007/BF02983595
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A cracked plate with a patch bonded on one side was treated with a crack-bridging model using weight function : assuming continuous distribution of springs acting between the crack surfaces, the stress intensity factor of the patched crack was numerically obtained. Especially in the case of a patched crack subjected to residual non-uniform stress, the stress intensity factor was easily with the corresponding approximate weight function. This paper presented the stress intensity factors for a crack partially patched within a finite plate or a patched crack initiated from a notch.
引用
收藏
页码：1659 / 1664
页数：6
相关论文
共 50 条
  • [41] Stress Intensity Factor of an Edge Crack in Composite Media
    S. Das
    R. Prasad
    S. Mukhopadhyay
    International Journal of Fracture, 2011, 172 : 201 - 207
  • [42] STRESS INTENSITY FACTOR OF AN EDGE CRACK IN COMPOSITE MEDIA
    Das, S.
    Prasad, R.
    Mukhopadhyay, S.
    INTERNATIONAL JOURNAL OF FRACTURE, 2011, 172 (02) : 201 - 207
  • [43] Evaluation of Stress Intensity Factor using Displacement Correlation Techniques
    Alshoaibi, Abdulnaser M.
    Ariffin, Ahmad Kamal
    JURNAL KEJURUTERAAN, 2008, 20 : 75 - 81
  • [44] An approximate evaluation of the stress intensity factors for cracked plates
    Nobile, L
    Nobile, M
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS, 2003, 251-2 : 291 - 296
  • [45] Approximate Closed from Weight Function for an Elliptical Crack in an Infinite Body
    A.J. Krasowsky
    I.V. Orynyak
    A.Yu. Gienko
    International Journal of Fracture, 1999, 99 : 117 - 130
  • [46] Stress intensity factor solutions for fretting fatigue using stress gradient factor
    Antunes, Marcelo Avelar
    Moreira da Silva, Cosme Roberto
    Fontes do Rego, Eduardo Martins
    de Oliveira Miranda, Antonio Carlos
    ENGINEERING FRACTURE MECHANICS, 2017, 186 : 331 - 346
  • [47] Stress Concentration Factor and Stress Intensity Factor with U-notch and Crack in the Beam
    Seo, Bo Seong
    Lee, Kwang Ho
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2016, 40 (05) : 513 - 523
  • [48] Analysis of the Fracture Characteristics and the Stress Intensity Factor of the Symmetric Coalescence Crack in Rock
    Wang, Jun
    Liu, Jie
    Ouyang, Xiangsen
    Zou, Hongbo
    GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2019, 37 (04) : 2535 - 2544
  • [49] Analysis of the Fracture Characteristics and the Stress Intensity Factor of the Symmetric Coalescence Crack in Rock
    Jun Wang
    Jie Liu
    Xiangsen Ouyang
    Hongbo Zou
    Geotechnical and Geological Engineering, 2019, 37 : 2535 - 2544
  • [50] Approximate Determination of Stress Intensity Factor for Multiple Surface Cracks
    Kastratovic, Gordana
    Vidanovic, Nenad
    Grbovic, Aleksandar
    Rasuo, Bosko
    FME TRANSACTIONS, 2018, 46 (01): : 39 - 45
12345