Evaluation of stress intensity factor for a partially patched crack using an approximate weight function

被引：2
|
作者：
Kim, JH
Hong, SG
Lee, SB
机构：
[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Taejon 305701, South Korea
[2] KRISS, Force Measurement & Evaluat Lab, Taejon 305701, South Korea
来源：
KSME INTERNATIONAL JOURNAL | 2003年 / 17卷 / 11期
关键词：
crack-bridging model; stress intensity factor; weight function; patched crack; notch;
D O I：
10.1007/BF02983595
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A cracked plate with a patch bonded on one side was treated with a crack-bridging model using weight function : assuming continuous distribution of springs acting between the crack surfaces, the stress intensity factor of the patched crack was numerically obtained. Especially in the case of a patched crack subjected to residual non-uniform stress, the stress intensity factor was easily with the corresponding approximate weight function. This paper presented the stress intensity factors for a crack partially patched within a finite plate or a patched crack initiated from a notch.
引用
收藏
页码：1659 / 1664
页数：6
相关论文
共 50 条
  • [31] Determining the Stress Intensity Factor of the Wellbore with Perforation in Infinite Plate Using Weight Functions
    Zhang Zhimin
    Gao Wenhua
    ELECTRONIC JOURNAL OF GEOTECHNICAL ENGINEERING, 2016, 21 (13): : 4825 - 4834
  • [32] Stress intensity factor solutions for several crack problems using the proportional crack opening displacements
    Lan, Xin
    Ji, Shaobo
    Noda, Nao-Aki
    Cheng, Yong
    ENGINEERING FRACTURE MECHANICS, 2017, 171 : 35 - 49
  • [33] Solution to stress intensity factor by weight function method based on deep learning
    Zhao Y.
    Wang S.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2023, 44 (19):
  • [34] The Evaluation of the Stress Intensity Factor During Crack-Microcrack Interaction Using Complex Variables Method and Photoelasticity
    Hadjab, Hadda
    CURRENT THEMES IN ENGINEERING SCIENCE 2010: WORLD CONGRESS ON ENGINEERING, 2010, 1394 : 19 - 25
  • [35] Weight function analyses and stress intensity factors for corner/surface crack in straight and tapered lugs
    Zhang, Bo
    Xu, Wu
    Wu, Xue-Ren
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (03) : 689 - 708
  • [36] Analysis of the stress intensity factor dependence with the crack velocity using a lattice model
    Braun, Matias
    Gonzalez Albuixech, Vicente Francisco
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2019, 42 (05) : 1075 - 1084
  • [37] Stress intensity factor solution for a surface crack with high aspect ratio subjected to an arbitrary stress distribution using the influence function method
    Nagai, M.
    Miura, N.
    Shiratori, M.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2015, 131 : 2 - 9
  • [38] Stress intensity factor solution for edge interface crack based on the crack tip stress without the crack
    Oda, Kazuhiro
    Takahata, Yosuke
    Kasamura, Yuya
    Noda, Nao-Aki
    ENGINEERING FRACTURE MECHANICS, 2019, 219
  • [39] A stress intensity factor estimation method for kinked crack
    Li, Yufei
    Sun, Tao
    Gao, Qing
    Tan, Chunqing
    ENGINEERING FRACTURE MECHANICS, 2018, 188 : 202 - 216
  • [40] Research on stress intensity factor of crack at intersection of crossbores
    Zhang Si
    Zhou Sizhu
    ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (04):
12345