Effects of Inlet Swirl on Suction Side Phantom Cooling

被引:0
|
作者
Zhang, Yang [1 ]
Li, Yifei [1 ]
Yuan, Xin [1 ]
机构
[1] Tsinghua Univ, Gas Turbine Inst, Key Lab Thermal Sci & Power Engn, Minist Educ, Beijing 100084, Peoples R China
来源
PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 5C | 2016年
关键词
D O I
暂无
中图分类号
O414.1 [热力学];
学科分类号
摘要
Though the temperature of the coolant injected from the endwall increases after the mixing process in the main flow, the injections moving from the endwall to the airfoil suction side still have the potential of second order cooling. This part of the coolant is called "Phantom cooling" in the paper. This paper is focused on the function of the coolant from fan-shaped. holes on endwall surface which brought by passage vortex to the airfoil suction side. The test cascades are based on the profile of General Electric Energy Efficient Engine (GE-E-3), with the inlet Mach number of 0.1 and Reynolds number of 1.46x10(5). The scale ratio of the test vanes is 1.95 and the film cooling effectiveness is tested with Pressure Sensitive Painting (PSP) Technology. Nitrogen is used to simulate the coolant which can provide a density ratio near 1.0. Two adjacent passages are investigated simultaneously by which the film cooling effectiveness can be compared in the same case on the suction side surface. The inlet rotating flow is simulated by an upstream swirler at the inlet, fixed at 5 different positions along the pitchwise direction. They are Blade 0 aligned, Passage 1 aligned, Blade 1 aligned, Passage 2 aligned and Blade 2 aligned. According to the experimental results, the inlet rotating flow can dominate the film cooling effectiveness distribution at the Suction Side. The averaged film cooling effectiveness changes substantially with the change in the swirler position. The inlet swirling flow effects are compared on the adjacent vanes at upstream and downstream regions. The research shows that the different pitchwise position of the inlet swirler is a significant factor which can change the phantom cooling phenomenon on the suction side. The relative position of inlet swirler cannot be ignored for Nozzle Guide Vane design.
引用
收藏
页数:14
相关论文
共 50 条
  • [41] AERODYNAMIC PERFORMANCE OF SUCTION-SIDE GILL REGION FILM COOLING
    Chappell, Justin
    Ligrani, Phil
    Sreekanth, Sri
    Lucas, Terry
    Vlasic, Edward
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 4, PTS A AND B, 2008, : 759 - 773
  • [42] Aerodynamic Performance of Suction-Side Gill Region Film Cooling
    Chappell, Justin
    Ligrani, Phil
    Sreekanth, Sri
    Lucas, Terry
    Vlasic, Edward
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2010, 132 (03):
  • [43] FILM COOLING PERFORMANCE ON TURBINE BLADE SUCTION SIDE WITH VARIOUS FILM COOLING HOLE ARRANGEMENTS
    Zhou, Zhiyu
    Li, Haiwang
    Xie, Gang
    You, Ruquan
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 7B, PT I, 2020,
  • [44] A COMPUTATIONAL INVESTIGATION INTO THE EFFECTS OF INLET SWIRL ON A SHROUDED SPIRAL BEVEL GEAR
    Turner, A.
    Morvan, H. P.
    Simmons, K.
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 5C, 2015,
  • [46] Study for Effects of Inlet Swirl on Flow Characteristic of Rotating Labyrinth Sealing
    Liang Y.-Q.
    Lyu Y.-L.
    Shen Y.
    Chai J.-S.
    Tuijin Jishu/Journal of Propulsion Technology, 2019, 40 (05): : 1093 - 1098
  • [47] Influence of dual-side inlet swirl-injection on performance of solid rocket ramjet
    College of Astronautics, Northwestern Polytechnical University, Xi'an 710072, China
    Guti Houjian Jishu, 2008, 6 (591-594+598):
  • [48] Film cooling on a gas turbine blade pressure side or suction side with axial shaped holes
    Gao, Zhihong
    Narzary, Diganta P.
    Han, Je-Chin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (9-10) : 2139 - 2152
  • [49] Effects of Feeding Mode and Inlet Area Ratio on Heating Characteristics in Dual-Inlet Swirl Tubes
    Xu, X.
    Wang, J.
    Yang, Q.
    Liu, H.
    Wang, H.
    JOURNAL OF APPLIED FLUID MECHANICS, 2021, 14 (03) : 833 - 845
  • [50] Thermal effects on a pressure swirl nozzle in spray cooling
    Xie, J. L.
    Gan, Z. W.
    Wong, T. N.
    Duan, F.
    Yu, S. C. M.
    Wu, Y. H.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 73 : 130 - 140