Effect of CNT addition approach on the microstructure and properties of NiAl-CNT nanocomposites produced by mechanical alloying and spark plasma sintering

被引：36

作者：

Ameri, Sorour ^{[1
]}

Sadeghian, Zohreh ^{[1
]}

Kazeminezhad, Iraj ^{[2
]}

机构：

[1] Shahid Chamran Univ Ahvaz, Dept Mat Sci & Engn, Fac Engn, Ahvaz 6135743337, Iran

[2] Shahid Chamran Univ Ahvaz, Fac Sci, Dept Phys, Ahvaz 6135743337, Iran

来源：

INTERMETALLICS | 2016年 / 76卷

关键词：

NiAl; Intermetallic; CNT; Mechanical alloying; Spark plasma sintering; CARBON NANOTUBES CNTS; COMPOSITES; MULTI; FABRICATION;

D O I：

10.1016/j.intermet.2016.06.010

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

An approach was offered to synthesize NiAl-CNT intermetallic matrix nanocomposite by mechanical alloying (MA) to ensure the effective distribution of carbon nanotubes (CNTs) within the matrix. For this purpose 0.5 and 1 wt% of CNTs were added to the powder mixture before the completion of reaction between Ni and Al. The resultant powders were compared to the powders obtained from MA of ex situ synthesized NiAl intermetallic compound with CNTs. Bulk samples were fabricated by spark plasma sintering (SPS) that retained the integrity of CNTs in the matrix. Structural evolutions were investigated by X-ray diffractometery (XRD). Field emission scanning electron microscopy (FESEM) micrographs showed that the offered MA approach caused the CNTs to uniformly embed in the in situ synthesized NiAl matrix. Meanwhile better distribution of CNTs resulted in higher density of SPSed bulk nano composite as well as higher hardness up to 5.6 GPa compared to 5.41 of NiAl intermetallic obtained from the same MA time. Fracture toughness showed more than 6.4% increase with bridging and pull out of CNTs and deflection of cracks as toughening mechanisms. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：41 / 48

页数：8

共 30 条

[1] Creep behavior and wear resistance of Al 5083 based hybrid composites reinforced with carbon nanotubes (CNTs) and boron carbide (B4C) [J].

Alizadeh, Ali ;

Abdollahi, Alireza ;

Biukani, Hootan .

JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 650 :783-793

[2]

[Anonymous], ADV ENG MAT

[3] Development of NiFe-CNT and Ni3Fe-CNT nanocomposites by mechanical alloying [J].

Azadehranjbar, S. ;

Karimzadeh, F. ;

Enayati, M. H. .

ADVANCED POWDER TECHNOLOGY, 2012, 23 (03) :338-342

[4] Carbon nanotube reinforced metal matrix composites - a review [J].

Bakshi, S. R. ;

Lahiri, D. ;

Agarwal, A. .

INTERNATIONAL MATERIALS REVIEWS, 2010, 55 (01) :41-64

[5]

Bendjemil B., 2015, Chemical and Materials Engineering, V3, P46

[6] Effect of powder reactivity on fabrication and properties of NiAl/Al2O3 composite coated on cast iron using spark plasma sintering [J].

Beyhaghi, Maryam ;

Kiani-Rashid, Ali-Reza ;

Kashefi, Mehrdad ;

Khaki, Jalil Vandati ;

Jonsson, Stefan .

APPLIED SURFACE SCIENCE, 2015, 344 :1-8

[7] Spark plasma sintering of multi-, single/double- and single-walled carbon nanotube-reinforced alumina composites: Is it justifiable the effort to reinforce them? [J].

Bocanegra-Bernal, M. H. ;

Dominguez-Rios, C. ;

Echeberria, J. ;

Reyes-Rojas, A. ;

Garcia-Reyes, A. ;

Aguilar-Elguezabal, A. .

CERAMICS INTERNATIONAL, 2016, 42 (01) :2054-2062

[8] Graphene-metal oxide nanohybrids for toxic gas sensor: A review [J].

Chatterjee, Shyamasree Gupta ;

Chatterjee, Somenath ;

Ray, Ajoy K. ;

Chakraborty, Amit K. .

SENSORS AND ACTUATORS B-CHEMICAL, 2015, 221 :1170-1181

[9] Dispersion of carbon nanotubes (CNTs) in aluminum powder [J].

Esawi, A. ;

Morsi, K. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (02) :646-650

[10] QUASI-STATIC SOLID PARTICLE DAMAGE IN BRITTLE SOLIDS .1. OBSERVATIONS, ANALYSIS AND IMPLICATIONS [J].

EVANS, AG ;

WILSHAW, TR .

ACTA METALLURGICA, 1976, 24 (10) :939-956

← 1 2 3 →