Influence of superficial CeO2 coating on high temperature oxidation behavior of Ti-6Al-4V

被引：22
|
作者：
Sreedhar, V. [1 ]
Das, J. [1 ]
Mitra, R. [1 ]
Roy, S. K. [1 ]
机构：
[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2012年 / 519卷
关键词：
CeO2; coating; Oxidation; Ti-6Al-4V; MECHANICAL-PROPERTIES; STAINLESS-STEEL; TITANIUM; ALLOYS;
D O I：
10.1016/j.jallcom.2011.12.118
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The effect of superficial CeO2 coating on the oxidation behavior of Ti-6Al-4V has been studied under isothermal and cyclic heating conditions in the temperature range of 923-1223 K in dry air. During the early periods of exposure, the oxide scale grows obeying near linear followed by near parabolic kinetics and consists of alternate layers of alpha-Al2O3 and TiO2. The mass gain of the uncoated alloys is found to be two times higher than that of the coated one in the temperature range of 923-1123 K up to 36 h of exposure. The scale composition on the bare or coated alloy is found to depend both on the temperature and on the time of exposure. During cyclic exposure, the scale suffers spallation for both the bare and the coated alloy, which has been attributed to insufficient plasticity of the scale. (C) 2012 Elsevier B. V. All rights reserved.
引用
收藏
页码：106 / 111
页数：6
相关论文
共 50 条
  • [41] Impact of Morphology on the High Cycle Fatigue Behavior of Ti-6Al-4V for Aerospace
    Lee, Yoon-Seok
    Cho, Seungchan
    Ji, Changwook
    Jo, Ilguk
    Choi, Moonhee
    METALS, 2022, 12 (10)
  • [42] Gas nitriding and subsequent oxidation of Ti-6Al-4V alloys
    Dong Bok Lee
    Iryna Pohrelyuk
    Oleh Yaskiv
    Jae Chun Lee
    Nanoscale Research Letters, 7
  • [43] Non-isothermal kinetic analysis of high temperature oxidation of Ti-6Al-4V alloy
    Rajabi, A.
    Mashreghi, A. R.
    Hasani, S.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 815
  • [44] Oxidation behavior of a high Si content Al-Si composite coating fabricated on Ti-6Al-4V substrate by mechanical alloying method
    Chen, Cheng
    Feng, Xiaomei
    Shen, Yifu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 701 : 27 - 36
  • [45] Influence of annealing temperature on microstructure evolution of TiAlSiN coating and its tribological behavior against Ti6Al4V alloys
    Hong, Dongbo
    Huang, Lei
    Yuan, Juntang
    Li, Chao
    CERAMICS INTERNATIONAL, 2021, 47 (03) : 3789 - 3796
  • [46] Solidification Behavior of Ti-6Al-4V Alloy
    Mizukami, Hideo
    Shirai, Yoshihisa
    Kawakami, Akira
    Mitchell, Alec
    ISIJ INTERNATIONAL, 2020, 60 (11) : 2455 - 2461
  • [47] Coating Formation on Ti-6Al-4V Alloy by Micro Arc Oxidation in Molten Salt
    Sobolev, Alexander
    Wolicki, Israel
    Kossenko, Alexey
    Zinigrad, Michael
    Borodianskiy, Konstantin
    MATERIALS, 2018, 11 (09)
  • [48] Anodic Voltage Dependence of Ti-6Al-4V Substrates and Hydroxyapatite Coating
    He, Dai-Hua
    Wang, Pu
    Liu, Ping
    Liu, Xin-Kuan
    Chen, Xiao-Hong
    Li, Wei
    Zhang, Ke
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2019, 19 (09) : 5700 - 5706
  • [49] Preparation and Tribology of Textured Ti-6Al-4V with Thermal Oxide Coating
    Wang, Xiaoyi
    Xu, Zhibiao
    Lu, Haowen
    Tan, Yue
    Xu, Xing
    Wu, Hao
    COATINGS, 2025, 15 (03):
  • [50] Strong and Ductile Ti-6Al-4V Alloy Produced by Hot Pressing of Ti-6Al-4V Swarf
    Yang, F.
    Pi, Z. Q.
    Zhao, Q. Y.
    Raynova, S.
    Liu, Q.
    Sharp, K.
    Brandt, M.
    Bolzoni, L.
    Qian, M.
    JOM, 2019, 71 (03) : 1056 - 1061
12345