Processing of Al-Sc aluminum alloy using SLM technology

被引：44
|
作者：
Koutny, Daniel [1 ]
Skulina, Daniel [1 ]
Pantelejev, Libor [1 ]
Palousek, David [1 ]
Lenczowski, Blanka [2 ]
Palm, Frank [2 ]
Nick, Andreas [3 ]
机构：
[1] Brno Univ Technol, Fac Mech Engn, Tecn 2896-2, Brno 61669, Czech Republic
[2] Airbus Grp Innovat Met M&P TXIM, D-81663 Munich, Germany
[3] AIRBUS APWORKS GmbH, Willy Messerschmitt Str 1, D-82024 Taufkirchen, Germany
来源：
10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES [LANE 2018] | 2018年 / 74卷
关键词：
Selective Laser Melting (SLM); Al-Sc alloy; Scalmalloy (R); Microstructure; Mechanical properties; MECHANICAL-PROPERTIES; MICROSTRUCTURE; SCANDIUM;
D O I：
10.1016/j.procir.2018.08.027
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The proposed paper deals with the experimental determination of process parameters reaching densities >99 % for Scandium modified aluminum alloy (Scalmalloy (R)) processed by SLM 280HL. The alloy achieves significantly higher yield strength and higher elongation than the AlSi10Mg aluminum alloy figcommonly used. Potential of this alloy is for lightweight applications in space, aerospace, and automotive industries, where is a need of the best possible stiffness to weight ratio. Experiments were provided with different values of laser power and laser scanning speed. Layer thickness and other parameters stayed unchanged. The X-ray micro-computed tomography (mu CT) scanning of the tensile specimen was used in order to obtain qualitative and quantitative information about the porosity. (C) 2018 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：44 / 48
页数：5
相关论文
共 50 条
  • [31] PREPARATION OF Al-Sc ALLOY IN CHLORIDE SYSTEM WITH MOLTEN SALT ELECTROLYSIS
    Tian Yanwen
    Transactions of Nonferrous Metals Society of China, 1998, (04) : 95 - 100
  • [32] On the addition of precipitation- and work-hardening in an Al-Sc alloy
    Royset, Jostein
    Ryum, Nils
    Bettella, Diego
    Tocco, Alessio
    Jia, Zhihong
    Solberg, Jan Ketil
    Reiso, Oddvin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 : 175 - 178
  • [33] Characterization of a laser-fabricated hypereutectic Al-Sc alloy bar
    Rometsch, Paul A.
    Zhong, Hao
    Nairn, Kate M.
    Jarvis, Tom
    Wu, Xinhua
    SCRIPTA MATERIALIA, 2014, 87 : 13 - 16
  • [34] Influence of magnesium on grain refinement and ductility in a dilute Al-Sc alloy
    Furukawa, M
    Utsunomiya, A
    Matsubara, K
    Horita, Z
    Langdon, TG
    ACTA MATERIALIA, 2001, 49 (18) : 3829 - 3838
  • [35] Rate-dependent deformation and dislocation substructure of Al-Sc alloy
    Lee, WS
    Chen, TH
    SCRIPTA MATERIALIA, 2006, 54 (08) : 1463 - 1468
  • [36] Effect of Mg addition on the creep and yield behavior of an Al-Sc alloy
    Marquis, EA
    Seidman, DN
    Dunand, DC
    ACTA MATERIALIA, 2003, 51 (16) : 4751 - 4760
  • [37] Effects of synergetic ultrasound on the Sc yield and primary Al3Sc in the Al-Sc alloy prepared by the molten salts electrolysis
    Liu, Xuan
    Guo, Zhichao
    Xue, Jilai
    Zhang, Cheng
    ULTRASONICS SONOCHEMISTRY, 2019, 52 : 33 - 40
  • [38] STRESS IN AL-SC INTERCONNECTION LAYERS
    HARA, T
    HOSODA, N
    NAGANO, S
    UEDA, T
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 1993, 32 (10A): : L1394 - L1396
  • [39] Annealing effects in Al-Sc alloys
    Smola, B.
    Stulikova, I.
    Ocenasek, V.
    Pelcova, J.
    Neubert, V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 462 (1-2): : 370 - 374
  • [40] Morphological characteristics of Al3Sc particles and crystallographic orientation relationships of Al3Sc/Al interface in cast Al-Sc alloy
    Yan, K.
    Chen, Z. W.
    Zhao, Y. N.
    Ren, C. C.
    Lu, W. J.
    Aldeen, A. W.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 861
12345