CO2 laser cutting & heating using silver halide fibers as scanning elements

被引：0
|
作者：
Dekel, B [1 ]
Katzir, A [1 ]
机构：
[1] Tel Aviv Univ, Raymond & Beverly Sackler Fac Exact Sci, Sch Phys & Astron, IL-69978 Tel Aviv, Israel
来源：
BIOMEDICAL SENSORS, FIBERS, AND OPTICAL DELIVERY SYSTEMS, PROCEEDINGS | 1999年 / 3570卷
关键词：
D O I：
10.1117/12.336949
中图分类号：
Q81 [生物工程学（生物技术）]; Q93 [微生物学];
学科分类号：
071005 ; 0836 ; 090102 ; 100705 ;
摘要：
A CO2 laser device based on a scanned Silver halide infra-red (I.R) optical fiber was designed and constructed. Power delivery were performed by scanning the output end of the optical fiber in two dimensions. A permanent magnet was attached to this end of the fiber, and it was displaced by a varying electro magnetic field. The device is computerized, which enables to control the scanning speed, laser output and magnetic field strength. Powered by a CO2 laser the equipment is capable of cutting, heating or marking on various surfaces. This paper describes applications in which CO2 laser energy is guided to remote locations via an I.R optical fiber. The output profile distribution, spot size and resolution were investigated and the results are compared to a simple theoretical model.
引用
收藏
页码：38 / 46
页数：9
相关论文
共 50 条
  • [1] CO2 laser cutting & heating using silver halide fibers as scanning elements
    Dekel, B.
    Katzir, A.
    Proceedings of SPIE - The International Society for Optical Engineering, 3570 : 38 - 46
  • [2] Hollow grass waveguides and silver halide fibers as scanning elements for CO2 laser marking systems
    Dekel, B
    Inberg, A
    Croitoru, N
    Shalem, S
    Katzir, A
    OPTICAL ENGINEERING, 2000, 39 (05) : 1384 - 1390
  • [3] Welding of Active Diamond Elements on Cutting Disks Using CO2 Laser
    Charalampides, Georgios
    Dontu, Octavian
    Gheorghe, Gheorghe I.
    Besnea, Daniel
    Avarvarei, Iulian
    Ciobanu, Robert
    Beca, P.
    2ND INTERNATIONAL CONFERENCE ON INNOVATIONS, RECENT TRENDS AND CHALLENGES IN MECHATRONICS, MECHANICAL ENGINEERING AND NEW HIGH-TECH PRODUCTS DEVELOPMENT (MECAHITECH '10), 2010, : 243 - 246
  • [4] SILVER-HALIDE FIBERS FOR SURGICAL APPLICATIONS OF CO2-LASER
    GAL, D
    ELDAR, M
    VALDEN, R
    BATLER, A
    NEUFELD, HN
    GATON, E
    VOLMAN, M
    AKSELROD, S
    LEVITE, A
    KATZIR, A
    PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS, 1984, 494 : 71 - 75
  • [5] Characteristics of polycrystalline silver halide fiber for transmitting CO2 laser
    Gao, JP
    Bian, BY
    Chen, HM
    Wu, ZR
    JOURNAL OF INORGANIC MATERIALS, 2000, 15 (01) : 119 - 123
  • [6] Characteristics of polycrystalline silver halide fiber for transmitting CO2 laser
    Gao, Jianping
    Bian, Beiya
    Chen, Huimin
    Wu, Zhongren
    Wuji Cailiao Xuebao/Journal of Inorganic Materials, 2000, 15 (01): : 119 - 123
  • [7] Annular Heating of Optical Fiber with a CO2 Laser using Reflective Axicon Elements
    Klimowych, William
    MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY XIX, 2014, 8973
  • [8] Polishing of optical fibers using a CO2 laser
    Orun, H
    Udrea, M
    Alacakir, A
    SIOEL '99: SIXTH SYMPOSIUM ON OPTOELECTRONICS, 2000, 4068 : 570 - 575
  • [9] The analysis of CO2 laser cutting
    Yilbas, BS
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 1997, 211 (03) : 223 - 232
  • [10] CUTTING AND WELDING WITH CO2 LASER
    不详
    METAL FORMING, 1969, 36 (09): : 258 - &
12345