NiO/AlGaN interface reconstruction and transport manipulation of p-NiO gated AlGaN/GaN HEMTs

Normally off AlGaN/GaN high electron mobility transistors with a p-type gate are promising for power switching applications, with advantages of low energy consumption and safe operation. In this work, p-NiO is employed as a gate stack, and the interfacial reconstruction and band structure modification at the p-NiO/AlGaN interface have been demonstrated to manipulate channel transport of AlGaN/GaN high electron mobility transistors by post-annealing. In addition to achieving a positive threshold voltage of 0.6 V and a large saturation output current of 520 mA/mm, we found that the gate leakage and On/Off drain current ratio can be improved significantly by more than 10(4) due to the p-NiO/AlGaN interfacial reconstruction. However, high annealing temperature also results in an increasing ON-resistance and a dramatically increased knee voltage (V-K), which can be attributed to the formation of an ultra-thin gamma-Al2O3 layer and the substitution of O on N site as a shallow donor at the p-NiO/AlGaN interface confirmed by experimental analyses. Theoretical calculations indicate that such interface reconstruction facilitates an additional potential well at the p-NiO/AlGaN interface to which electrons are spilled out from a two-dimensional electron gas channel under high forward gate voltage, resulting in the increased V-K. Finally, an optimized annealing condition was confirmed that can eliminate this increased V-K phenomenon and simultaneously remain these significantly improved device performances. These findings provide deep understanding of the performance manipulation of AlGaN high electron mobility transistors, which is very important for engineering the p-NiO/AlGaN interface toward high-performance and stable devices.</p>