Effect of beam oscillation on intermetallic compounds and mechanical properties of steel/aluminum laser welded joint

被引:12
作者
Li, Tian [1 ]
Zhou, Dianwu [1 ]
Yan, Youruiling [1 ]
Liu, Jinshui [2 ]
机构
[1] Hunan Univ, State Key Lab Adv Design & Mfg Vehicle Body, Changsha 410082, Hunan, Peoples R China
[2] Hunan Univ, Sch Mat Sci & Engn, Changsha 410082, Hunan, Peoples R China
基金
中国国家自然科学基金;
关键词
Oscillation laser techniques; IMC; Mechanical property; DISSIMILAR JOINT; NI-FOIL; STEEL; ALUMINUM; MICROSTRUCTURE; COPPER;
D O I
10.1016/j.jmapro.2021.10.066
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Brittle Fe-Al compounds limit the performance of the steel/aluminum joint. Beam oscillation laser technology was performed to control the thickness, morphology and distribution of intermetallic compounds (IMCs) at interface. The results showed that beam oscillation significantly reduced the thickness of IMC layer. When oscillation frequency was 10 Hz, the needle-like phase embedded in aluminum matrix was obviously passivated in the circular oscillation mode, while the needle-like phase at interface tend to distribute parallel to the layer-like IMC, and formed a "bite" connection effect with aluminum matrix. In the linear oscillation mode, the needle-like phase disappeared, and smooth and flat interface was obtained. Compared with the non-oscillation mode, in the case of circular or linear oscillation mode, the width of molten pool was significantly increased, the crystal grains were refined, and the joint property was increased by 26% and 17% respectively, which were caused by the combined effect of mechanical bonding and metallurgical regulation. The influence mechanism of beam oscillation on the thickness, morphology and distribution of IMC at interface was revealed by high-speed photography and finite element simulation, which provides a new idea for the welding of steel/aluminum dissimilar materials.
引用
收藏
页码:40 / 53
页数:14
相关论文
共 23 条
[1]   Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening Behavior [J].
Baltazar Hernandez, V. H. ;
Nayak, S. S. ;
Zhou, Y. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (10) :3115-3129
[2]   Fracture mechanisms of Al/steel resistance spot welds in lap shear test [J].
Chen, Nannan ;
Wang, Hui-Ping ;
Carlson, Blair E. ;
Sigler, David R. ;
Wang, Min .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 243 :347-354
[3]   Interface microstructure and fracture behavior of single/dual-beam laser welded steel-Al dissimilar joint produced with copper interlayer [J].
Chen, Shuhai ;
Zhai, Zhiliang ;
Huang, Jihua ;
Zhao, Xingke ;
Xiong, Jiguang .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (1-4) :631-643
[4]   Microstructures and Mechanical Properties of Laser Penetration Welding Joint With/Without Ni-Foil in an Overlap Steel-on-Aluminum Configuration [J].
Chen, Shuhai ;
Huang, Jihua ;
Ma, Ke ;
Zhao, Xingke ;
Vivek, Anupam .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (07) :3064-3073
[5]   Influence of a Ni-foil interlayer on Fe/Al dissimilar joint by laser penetration welding [J].
Chen, Shuhai ;
Huang, Jihua ;
Ma, Ke ;
Zhang, Hua ;
Zhao, Xingke .
MATERIALS LETTERS, 2012, 79 :296-299
[6]   Numerical study of the effect of the oscillation frequency in buttonhole welding [J].
Cho, Won-Ik ;
Schultz, Villads ;
Woizeschke, Peer .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 261 :202-212
[7]   Reduction of pores by means of laser beam oscillation during remote welding of AlMgSi [J].
Fetzer, Florian ;
Sommer, Martin ;
Weber, Rudolf ;
Weberpals, Jan-Philipp ;
Graf, Thomas .
OPTICS AND LASERS IN ENGINEERING, 2018, 108 :68-77
[8]   The effect of interface reaction on vibration evolution and performance of aluminium to steel high power ultrasonic spot joints [J].
Haddadi, Farid ;
Abu-Farha, Fadi .
MATERIALS & DESIGN, 2016, 89 :50-57
[9]   Optimization of the solidification conditions by means of beam oscillation during laser beam welding of aluminum [J].
Hagenlocher, Christian ;
Sommer, Martin ;
Fetzer, Florian ;
Weber, Rudolf ;
Graf, Thomas .
MATERIALS & DESIGN, 2018, 160 :1178-1185
[10]   Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel [J].
Hao, Kangda ;
Li, Geng ;
Gao, Ming ;
Zeng, Xiaoyan .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 225 :77-83